Skip to Content
Exit

Tag Archive: Yamada

Sandpiper Evolution 2″ & 3″ vs Wilden PS800 & PS1500

Posted on by R Andrew Springer

How do the Sandpiper 2″ and 3″ Evolution AODD pumps perform when put up against the competition? They are more efficient, have a higher flow rate, cost less to operate and are easier to maintain. Sandpiper’s new Evolution series will save money over every other AODD pump on the market.

When it needs to be an AODD, it needs to be a Sandpiper Evolution!

Revolution S30 vs PS800

Tag Archive: Yamada

Sandpiper Evolution Standard Duty Pumps with Optimized Performance

Posted on by R Andrew Springer

Sandpiper EvolutionSandpiper has long been a leader in the AODD market, and now they have announced the EVOLUTION Line of Standard Duty Air Operated Double Diaphragm Pumps. Using the application of advanced engineering methods, Sandpiper Evolution has improved upon the trusted and proven product designs of their Standard Duty pumps. Standard Duty does not mean under performing. Sandpiper’s Standard Duty line outperforms the competition while requiring less maintenance time than the competition and being fully interchangeable with previous models.

EVOLUTION Beats the Competition:

  • Up to 32% Higher Max Flow Rate
  • Up to 67% Less Air Consumption
  • Up to 2.5 Time Better Air Economy
  • 5 Minute Pilot Valve Repair / Replace vs 55+ Minutes for Most Competitors

Tag Archive: Yamada

Pumper Parts to be Discontinued

Posted on by R Andrew Springer

Nomad Parts for ARO, Wilden and Yamada PumpsSpringer Parts LogoWith the coming of 2017 Warren Rupp is discontinuing their Pumper Parts line of OEM quality AODD replacement parts. Many of these parts will still be available at the same pricing through Springer Parts. Our site will have all of the available parts listed and our customer service team is ready to help you find the right parts.

Springer Parts provides parts for ARO®, Wilden® and Yamada® AODD Pumps as well as parts for many other pump types and other liquid handling equipment- all below OEM prices for the same quality product!

Find Replacement Parts through Springer Parts HERE

Tag Archive: Yamada

BLACOH Surge Shield Bridges the Gap Between Surge Dampeners and Vessels

Posted on by R Andrew Springer

Blacoh Surge ShieldBlacoh Surge Shield TankBLACOH’s new Surge Shield line ranges from 25-500 gallons in size, fitting in between the smaller SENTRY Pulsation/Surge Dampeners and their SURGE CONTROL line. Surge Shield is available in 9 different sizes with multiple bladder materials. Reduce the wear and tear on your pumps and piping systems with BLACOH Surge/Pulsation control products.

  (more…)

Tag Archive: Yamada

Graco Husky 1050 Natural Gas Diaphragm Pumps

Posted on by R Andrew Springer

One Inch AODD Pumps for Upstream and Midstream Oil & Gas

Graco Husky 1050 Natural Gas PumpGraco is pleased to announce a new line of Husky™ 1050 natural gas-operated double diaphragm pumps for the midstream and upstream oil and gas markets. Conforming to CSA/AM ANSI STD LC 6 and certified to CSA STD T.I.L. No. R-14, Graco’s expanded line of one-inch (25 mm) pumps safely operate on natural gas or compressed air.
(more…)

Tag Archive: Yamada

Graco Abrasion Resistant Diaphragm Pumps for Drilling Applications

Posted on by R Andrew Springer

Graco Husky 3300 Abrasion Resistant PumpGraco Abrasion Resistant Diaphragm Pumps are specifically designed for mining and other high abrasion applications. Aluminum bodied, rugged construction and time tested design make these pumps the workhorse of the industry. They range from 1″ to 3″ and can deliver up to 300 gpm. Contact us today for more information or a quote.
(more…)

Tag Archive: Yamada

Springer Parts Offers Hard to Find Parts & Repair Kits for Liquid Handling Equipment

Posted on by R Andrew Springer
Springer Parts Kit Collage

Parts & Kits for Pumps, Valves, Heat Exchangers and More…

Springer Parts covers a wide range of products from Centrifugal Pumps, Gear Pumps and Diaphragm Pumps to Sampling and Seat Valves. We carry everything from washers, nuts, and bolts to complete rebuild kits. We even offer parts and kits with materials of construction not offered by the OEM for changing application requirements.

Recently Springer Parts started offering rebuild kits for Armstrong®, Aurora®, Bell & Gossett®, Flygt®, Goulds G & L®, Hoffman®, Marlow®, PACO®, TACO®, and Weinman® pumps.

All Springer Parts are 10-40% less than the OEM parts and built as well or better than the OEM

See our selection on springerpumps.com and if there is something that you cannot find CONTACT US!



A Few OEMs We Supply Replacement Parts for:

  • Alfa Laval®
  • Almatec®
  • Aqua Chem®
  • Bardiani®
  • BouMatic®
  • GEMU®
  • Hoffman®
  • KSB®
  • Maxana®
  • Toftejorg®
  • Tuchen®
  • Wright Patterson®
  • And Many More…

Tag Archive: Yamada

Graco Husky 3300 Chemical Transfer Air Operated Double Diaphragm Pumps

Posted on by R Andrew Springer

Husky 3300 3″ AODD Pumps Offer a Wide Range of Chemical CompatibilityGraco Husky 3300 AODD Pump

The Husky 3300 is available in Polypropylene, Stainless Steel or Aluminum with a new center connection available on Polypropylene models. Improved air motor performance gives up to a 30% increase in efficiency and a 10% increase in flow over other market leaders. Other sizes are available to meet a wide range of process requirements.
(more…)

Tag Archive: Yamada

Graco’s Range of FDA Compliant SaniForce Air Operated Double Diaphragm Pumps

Posted on by R Andrew Springer

Four AODD Models that Meet CFR Title 21SaniForce 1040 FDA Compliant AODD Pump

With flows from 16 to 150 gpm and pressures to 120 psi the SaniForce AODD pump line covers a wide range of sanitary applications. The SaniForce 515, 1040, 1590 & 2150 come in stainless steel manifold material with PTFE, Santoprene or EPDM elastomers for handling most fluids that require FDA compliant/sanitary pumps.
(more…)

Tag Archive: Yamada

Graco Complete Container Evacuation Solutions for Barrels & Intermediate Bulk Containers (IBC)

Posted on by R Andrew Springer

Transfer Thick Materials, Without Dilution, from Drums & Bins!!!SaniForce BES Raised Thumb

Graco SaniForce Drum and Bin Unloaders are designed to reduce the time and labor needed to empty containers. Even containers filled with non-flowing liquids like viscous peanut butter (up to 1,000,000 cps) are pump-able. Drum Unloaders work with tapered or straight drums, with or without bags. All feature quick knockdown designs with a minimum amount of material for quick and frequent cleaning.

Drum Emptying Products Features:

  • 1 to 1,000,000 CPS Viscosities
  • Simple AODD Pumps to Full Drum Unloaders
  • Solids Handling Models
  • Easy to Operate, Clean and Maintain

Bin Evacuation Systems Features:

  • 1 to 1,000,000 CPS Viscosities
  • Available with:
    • Two AODD Pumps
    • Up to Four Piston Pumps
  • Pneumatic or Electric Control Options
  • Compact Design for Space Saving (Compared to Competitors)

Download Graco’s SaniForce Container Evacuation Solutions Brochure (pdf)

Graco Condiment, Dip & Salad Dressing Applications Flyer (pdf)

Graco SaniForce Cosmetic Applications Flyer (pdf)

Graco SaniForce Cultured Dairy Product Applications Flyer (pdf)

Graco SaniForce High Viscosity Fluid Applications Flyer (pdf)

Graco SaniForce Juice Concentrate & Puree Applications Flyer (pdf)

Graco SaniForce Personal Care Product Applications Flyer (pdf)

Graco SaniForce Wine Applications Flyer (pdf)

See the SaniForce BES at Work Below

Graco SaniForce Bin Evacuation System

See the SaniForce Drum Unloader at Work Below

Graco SaniForce Standard Drum

^