Skip to Content
Exit

Tag Archive: AMT

Apply Pressure & Flow with AMT’s 3″ Self-Priming High-Pressure Pumps

Posted on by Sara Springer

Introducing the latest edition to AMT’s line of Self-Priming High Pressure Pumps: the AMT® 3HY13HR. The 3 Inch NPT Aluminum Engine Driven High-Pressure High Flow Pump (also known as a Hydroseeder Pump) delivers both excellent pressure and flow for many applications including, but not limited to: general dewatering, agricultural spraying, hydroseeding, washdown, fire protection, and irrigation.

AMT’s single-stage centrifugal pumps are sand-cast aluminum construction with cast iron wear parts, male NPT ports, and EPDM/EPR Elastomers. They are available with gasoline engines, offered in both 3” and 4” models, and come standard with a heavy-duty steel frame, suction strainer, and designed for easy maintenance with a servicing tool included.

Features of the #HY13HR include:

  • Sand Cast Aluminum Construction with Cast Iron Wear Parts
  • EPDM/EPR Mechanical Seal, O-Rings, and Gaskets
  • 3” or 4” Male NPT Cast Iron Suction & Discharge Ports
  • Convertible High or Low Suction Port for Improved Efficiency Dependent on Self-Priming or Flooded Applications
  • Built-In EPDM Flapper/Check Valve Permits Priming up to 20′
  • Discharge Port Rotates 180° Increments
  • Available with Honda E-Start Gasoline Engine
  • Maximum Head up to 202′ TDH (87 PSI)
  • Maximum Flow up to 560 GPM
  • Includes Servicing Tool, Suction Strainer, and Heavy Duty Steel Frame with Battery Tray Included

3HY13HR SPECS:

  • Pump Type: High Pressure Centrifugal
  • Brand: AMT®
  • Shipping Weight LBS: 220
  • Shipping Length IN: 31
  • Main Material: Aluminum
  • Shipping Height IN: 25.1
  • SKU: AT3HY13HRSP
  • MPN: 3HY13HR
  • Fuel Tank Capacity: 1.6 Gal 6.1 Ltr, not qt
  • Driver Type: Gasoline Engine
  • Shipping Width IN: 29.5
  • Outlet Size: 3
  • Inlet Size: 3
  • Outlet Connection Type: NPT
  • Run Time: 150.00 min
  • Max FLow Rate: 560 GPM
  • Power: 13

Improve your operation with excellent pressure and flow with a 3HY13HR 3″ NPT Aluminum Engine Driven High-Pressure High-Flow Pump from AMT. For more information or to receive a quote, contact SPRINGER PARTS today.

THINK PUMPS. THINK PARTS. THINK SPRINGER.

Tag Archive: AMT

New From AMT Pumps: 3″ & 4″ STAINLESS STEEL SELF-PRIMING PUMPS

Posted on by Sara Springer

New for 2024 from AMT Pumps: 3″ and 4″ Stainless steel self-priming pumps. These work horses are designed for a broad range of high
capacity applications, including dewatering, liquid transfer, chemical transfer, circulation, and drainage applications.

These units have a stainless steel casing, bracket, seal plate, removable volute, and a clog resistant semi-open impeller. Pumps are designed to handle liquids with solids contents up to ½” spherical solids for our 3” models and ¾” spherical solids for our for 4” models. They also have built in check valves for fast priming that come standard on all units and fill/drain plugs for easy installation and servicing.

Additional features of AMT’s 3″ and 4″ Stainless steel self-priming pumps:

• Cast Stainless Steel Construction
• Viton Mechanical Seal, O-Rings and Gaskets
• Optional Silicon Carbide Seal Available
• 3” or 4” Male NPT Suction/Discharge
• Built-In Viton Flapper/Check Valve Permits Self-Priming up to 20’4” Stainless Steel Pump with A200-90 Optional Base
• Stainless Steel Self-Cleaning Semi Open Impeller
• Maximum Solids Handling
• 3” Models up to 1/2”
• 4” Models up to 3/4”
• 5 to 15 HP TEFC, Single and Three Phase Motors
• Fill & Drain Plugs for Easy Servicing
• Maximum Head up to 120’ TDH (52 PSI)
• Maximum Flow up to 620 GPM
• Maximum Temperature 200° F

It’s easy to see why AMT’s line of 3″ and 4″ Stainless steel self-priming pumps are a win for your next project. For more information or to receive a quote, please contact SPRINGER PUMPS® today.

THINK PUMPS. THINK PARTS. THINK SPRINGER.

BROCHURE

Tag Archive: AMT

Springer Parts Offers Hard to Find Parts & Repair Kits for Liquid Handling Equipment

Posted on by Sara Springer
Springer Parts Kit Collage

Parts & Kits for Pumps, Valves, Heat Exchangers and More…

Springer Parts covers a wide range of products from Centrifugal Pumps, Gear Pumps and Diaphragm Pumps to Sampling and Seat Valves. We carry everything from washers, nuts, and bolts to complete rebuild kits. We even offer parts and kits with materials of construction not offered by the OEM for changing application requirements.

Recently Springer Parts started offering rebuild kits for Armstrong®, Aurora®, Bell & Gossett®, Flygt®, Goulds G & L®, Hoffman®, Marlow®, PACO®, TACO®, and Weinman® pumps.

All Springer Parts are 10-40% less than the OEM parts and built as well or better than the OEM

See our selection on springerpumps.com and if there is something that you cannot find CONTACT US!



A Few OEMs We Supply Replacement Parts for:

  • Alfa Laval®
  • Almatec®
  • Aqua Chem®
  • Bardiani®
  • BouMatic®
  • GEMU®
  • Hoffman®
  • KSB®
  • Maxana®
  • Toftejorg®
  • Tuchen®
  • Wright Patterson®
  • And Many More…

Tag Archive: AMT

AMT Coolant Pumps

Posted on by Sara Springer

AMT Coolant PumpsAMT Coolant Pumps have been manufactured for a wide variety of industrial/commercial coolant and recirculating applications. The absence of a bottom bearing makes the unit ideal for handling erosive liquids. Units are interchangeable with a number of machine tools from the following manufacturers: Fuji®, Toshiba®, Hitachi®, Yasukawa®, Graymills® and Gusher®.

(more…)

Tag Archive: AMT

AMT Inline Circulator Pumps

Posted on by Sara Springer

AMT Inline Circulator Pumps are designed for continuous duty industrial/commercial systems. Pumps are available in a variety of material configurations to meet your specifications.Inline Circulator Centrifugal Pump

Features & Benefits:

  • Cast Iron or Silicon Bronze Construction
  • EPDM/EPR Mechanical Seal and Casing O-Ring
  • Models Available with Silicon Bronze Impeller
  • (more…)

Tag Archive: AMT

AMT MSV Series Multistage Pumps

Posted on by Sara Springer

MSV3-2-1P Multistage Pump with 2 Stages

These AMT commercial/industrial pumps are non-self-priming (gravity feed) units designed to handle high-pressure low flow liquid transfer applications where no suction lift is required. Typical installations include: hot and chilled water, boiler feed, condensate return, irrigation, (more…)

Tag Archive: AMT

New AMT Solids-Handling End-Suction Chemical Pumps

Posted on by Sara Springer

Up to 3/8″ Solids & 3/4″ to 2″ NPT SizesNew AMT Solids-Handling End-Suction Chemical Pumps

AMT Solids Handling End Suction Centrifugal pumps are designed for continuous-duty OEM, Industrial/Commercial and General Service applications including circulation, chemical processing, liquid transfer and cooling. Pull-from-rear design for easy service without disturbing any piping. Self-cleaning impellers to prevent clogging and handles solids up to 3/8″ diameter depending on the model. Pumps are close coupled to Totally Enclosed Fan Cooled (TEFC) motors. Pumps are not self-priming and require flooded suction.
(more…)

^