Skip to Content
Exit

Tag Archive: Multistage Pumps

T-Jet Multistage Centrifugal Pumps

Posted on by Sara Springer

T JET LargeT-JET multi-stage centrifugal pumps

The ideal pump for power and boiler feed applications

With capacities up to 4000 GPM and total dynamic head up to 1800′, Thomas Pump’s T-JET line of multi-stage pumps are perfectly suited for your high-flow, high-pressure needs.

  • MAX CAPACITY:
    • 4000 GPM
  • MAX DELIVERY
    • 100 BAR
  • MAX HEAD
    • 1800 FT
  • AVAILABLE MATERIALS
    • Cast Iron
    • Nodular Cast Iron
    • Stainless Steel

FLEXIBLE COUPLING
An optional flexible coupling allows the T-JET series pumps to connect to driving machines, generally for use on an electric motor.
LOW NET POSITIVE SUCTION HEAD DESIGN PREVENTS CAVITATION
SAFE FOR HIGH-TEMPERATURE APPLICATIONS

TJ SERIES
TJ Series pumps are horizontally and between bearings mounted. Suction flange PN16 and Delivery flange PN40. The shaft is supported by two, grease lubricated, antifriction bearings.
TJR SERIES
TJR Series pumps are horizontally and between bearings mounted. Suction flange PN16 and Delivery flange PN64. The shaft is supported by two, oil lubricated, antifriction bearings.
TJTK SERIES
TJTK Series pumps are vertically mounted. Suction flange PN16 and Delivery flange PN40. The shaft on the suction side is led in slide bearing lubricated by the pump liquid, on the delivery side is supported by the motor bearing. Motor and pump are connected by a stool and a rigid coupling.
TJTKK SERIES
TJTKK Series pumps are horizontally and between bearings mounted. PN25 Suction flange and PN100 Delivery flange. Suction and Delivery nozzles are easily turned in 90° steps. Mechanical seal chamber can also accommodate API682 seals. Bearing supports are designed for heavy duty applications and with separate oil chamber.

Tag Archive: Multistage Pumps

AMT MSV Series Multistage Pumps

Posted on by Sara Springer

MSV3-2-1P Multistage Pump with 2 Stages

These AMT commercial/industrial pumps are non-self-priming (gravity feed) units designed to handle high-pressure low flow liquid transfer applications where no suction lift is required. Typical installations include: hot and chilled water, boiler feed, condensate return, irrigation, (more…)

^