Skip to Content
Exit

“X” Out Traditional AODD Pump Problems with Evolution X by Sandpiper

Tag Archive: AODD

“X” Out Traditional AODD Pump Problems with Evolution X by Sandpiper

Posted on by Sara Springer

Get the performance you need from an AODD Pump without the traditional challenges: meet EVOLUTION X®, Sandpiper’s revolutionary solution for industrial and manufacturing processes.

Enjoy the enhanced convenience EVOLUTION X® Pumps bring to the table. These pumps boast the following features:

  • 50% fewer fasteners on the wet side, eliminating the need for washers and simplifying maintenance.
  • Stand-off-feet, designed for stability during servicing, preventing the pump from rolling or rocking.
  • Only 4 bolts required for air side maintenance, with easy-to-remove air cartridges for hassle-free servicing.

In addition, your project will benefit from the installation of an EVOLUTION X® AODD Pump through:

  • Reduce maintenance time by nearly 90%, allowing you to service the pump in as little as 5 minutes.
  • Save time and money by minimizing downtime and increasing operational efficiency.
  • Enjoy the highest flow rate among 1” AODD pumps, coupled with a 20% improvement in air efficiency.

Your system deserves to experience the game-changing impact of Evolution X. With a wide range of materials and porting options, this pump fits seamlessly into any application. For more information or to recieve a quote, contact SPRINGER PUMPS® today.

THINK PUMPS. THINK PARTS. THINK SPRINGER.

SandPiper Evolution X BROCHURE

Tag Archive: AODD

Tried & True: Sandpiper’s Standard Duty Pumps

Posted on by Sara Springer

Tried & True: Sandpiper’s line of standard-duty AODD pumps is anything but standard. These pumps are designed to get to work for you and deliver continuous operation for your next project. Sandpiper® provides time-tested value derived from their precision engineering, testing and stringent quality standards which have consistently elevated their brand’s reputation as the BEST AODD for over 60 years!

An incredibly versatile pump, Sandpiper’s standard duty pump line is ideal for aerospace, automotive, construction, ceramics, chemical, coatings, electronics/semi-conductor, environmental, wastewater, sanitary and marine, transportation, mining, oil & gas, packaging, pulp and paper, and steel & metal applications.

Sandpiper Standard Duty Pumps are available in the following variations:

  • Metallic ball valve
  • Non-Metallic ball valve
  • Non- Metallic poppet valve
  • Dewatering
  • Ore Processing

For more information on Sandpiper’s Standard duty pumps or to receive a quote contact SPRINGER PUMPS® today.

THINK PUMPS. THINK PARTS. THINK SPRINGER.

NO STALL GUARANTEE

DIAPHRAGM ROD GUARANTEE

5-YEAR WARRANTY

 

 

Tag Archive: AODD

Unleashing the Most Beastly of all AODD Pumps: Sandpiper’s 3″ Anti Clog Pump

Posted on by Sara Springer

If you were impressed by Sandpiper’s 2″ BEAST AODD Pump, then you’re going to need their bigger, more effective anti-clog 3″ Metallic Beast Pump. It’s ahead of the technological curve of its competition and is a great solution for Mine Dewatering, Meat & Poultry Processing, Chemical Sumps, and more applications.

Why should you go beast mode with your system by installing one of Sandpiper’s Metallic Beast AODD Pumps? The true value lies within the design, specifically, the flap valve. Now available in 2″ Metallic and Non-Metallic, and 3″ Metallic models!  These pumps feature innovative, patent-pending, flap valve technology allowing large solids to pass freely while resisting the accumulation of packable dust and small solids, preventing clogs.

The Metallic 3″ BEAST AODD Pumps:

  • Small Solids
  • Package Materials
  • Large Solids
  • Viscous Fluids
  • Abrasive Fluids
  • Harsh Chemicals

Additional advantages through performance guarantees when installing a Sandpiper Beast Pump:

  • Diaphragm Connecting Rod Guarantee
  • 5-Year Limited Product Warranty
  • Anti-Stall Air Valve Guarantee

Existing clients know Sandpiper Pumps stands by their products through quality equipment and support. Get to know a brand that is as serious about unleashing the Beast as you are and make an investment in your operation today. For more information or to receive a quote, contact SPRINGER PUMPS today.

THINK PUMPS. THINK PARTS. THINK SPRINGER.

NO STALL GUARANTEE

DIAPHRAM ROD GUARANTEE

5 YEAR WARRANTY

Tag Archive: AODD

Eliminate Manual Adjustments with SENTRY Automatic Inlet Stabilizer

Posted on by Sara Springer

If you’re tired of the constant wear and tear on the suction side of your AODD, if you’re ready to stop manually adjustments and just want more efficient, peak performance with an inlet stabilizer…we have the solution for you. Introducing the SENTRY™ Automatic Inlet Stabilizer by BLACOH® Industries.

Designed for 1.5″ and 2″ AODD Pumps, the SENTRY™ Automatic Inlet Stabilizer is compatible with all FNPT, BSP, ANSI Flange, Tri-Clamp inlet types. Requiring a permanent source of compressed gas, the SENTRY AIS fully integrates with an automatic venturi valve designed to accommodate negative pressures within the system. This dual-control mechanism ensures optimal system performance in both suction & positive pressure conditions. During vacuum conditions, the valve lifts the bladder to maintain dampening capabilities. While under positive pressure, it forces the bladder down with compressed air. This revolutionary device is patented and ready to make your job easy.

Features of the SENTRY™ Automatic Inlet Stabilizer:

  • Automatic air control self-adjusts as system
    pressure increases or decreases, and resets
    to be ready to operate again when system
    restarts
  • Extend service life of pump and inlet system
    components by stabilizing inlet pressure and
    smoothing fluid flow
  •  Avoid cavitation by eliminating acceleration
    head loss

Specifications for the SENTRY Automatic Inlet Stabilizer:

  • Housing materials: Stainless steel
  • Diaphragm materials: PTFE
  • Pump Sizes: 1.5” & 2” AODD Pump
  • Inlet Types: FNPT, BSP, ANSI Flange, Tri-Clamp
  • Max Pressure: 150 psi (10.3 bar)
  • Air Control: Automatic
  • Certifications: ATEX

For more information, to receive a quote or to purchase the SENTRY™ AIS, contact SPRINGER PUMPS® today.

THINK PUMPS. THINK PARTS. THINK SPRINGER

SENTRY AIS BLACOH Product Flyer

SENTRY AIS Product Slides

Tag Archive: AODD

New Flanged Manifold on Sandpiper G Series Pumps

Posted on by Sara Springer

Sandpiper® Pumps has made improvements to their G Series Pump flanged manifolds effective immediately.

Overview:

1”, 1½, & 2” Stainless SANDPIPER® S series and G series pump models will be available with fully cast-in Stainless Steel flanged manifolds.  The Stainless Threaded Flange and Welded Flange options will no longer be used.  Model numbers will be changed to reflect a Cast-in Universal Flange by using a ‘U’ for porting option instead of ‘R’ or ‘W’. Aluminum and Cast-Iron manifold options will not change.

Pumps and Parts Affected:

  • 1”, 1½”, & 2” Stainless S series and G series pump models with ‘R’ or ‘W’ port options.
    • Threaded Raised Face ‘R’ and Welded Raised Face ‘W’ option models will be obsoleted and replaced by a Cast-in Universal Flange model using ‘U’ for Porting Option.

Benefits of New Flanged Manifolds:

  • On stainless pumps, the flange will not have a threaded or welded joint exposed to the pumped fluid.
  • Universal cast flange construction will be offered at the same list price as threaded flanges, considerably less than a welded flange.

Interchangeability & Replacement:

  • On current S1F an G1F models the Threaded & Welded flanged models include a set of blocks to raise the pump and ensure the suction flange clears the mounting surface. The new cast-in flange manifold has taller feet so that riser blocks are not required. With the new manifold the distance from the mount surface to the suction and discharge port heights is .75in (19mm) lower.
  • Foot Mount Kit 475.305.000 can be purchased for S1F or G1F if there is need to raise ports to match the previous heights.
  • S15, G15, S20 & G20 cast-in flange models have identical port heights as the previous threaded and welded models.

The list price adder will be the same as the previous Threaded Flange adder. For more information about Sandpiper’s improved flanges for G-Series Pumps or to receive a quote, contact SPRINER PUMPS® today.

THINK PUMPS. THINK PARTS. THINK SPRINGER.

Tag Archive: AODD

Sandpiper Evolution 2″ & 3″ vs Wilden PS800 & PS1500

Posted on by Sara Springer

How do the Sandpiper 2″ and 3″ Evolution AODD pumps perform when put up against the competition? They are more efficient, have a higher flow rate, cost less to operate and are easier to maintain. Sandpiper’s new Evolution series will save money over every other AODD pump on the market.

When it needs to be an AODD, it needs to be a Sandpiper Evolution!

Revolution S30 vs PS800

Tag Archive: AODD

Graco’s Husky AODD Pump Complete Line Now Features ANSI/DIN Flanges

Posted on by Sara Springer

Husky ANSI and DIN Flanged-Pump FamilyHusky pumps are widely known for their performance, reliability and versatility. Now, they feature ANSI/DIN Flanges across the line with a rotatable flange design that makes installation quick and easy.

  (more…)

Tag Archive: AODD

Containment Duty Pumps: How They Work

Posted on by Sara Springer
AODD Diaphragm Failure

Prevent a situation like this with a Sandpiper Containment Duty Pump

When a diaphragm fails on a typical AODD pump, the fluid can leak into the air side of the pump and out of the exhaust muffler. When pumping water for example, it may only be an inconvenience, but still the cleanup is a housekeeping chore. When pumping abrasive, corrosive or aggressive fluid this will damage the air valve components, and is a potential hazard to personnel by spraying through the muffler and pooling around the pump.
(more…)

Tag Archive: AODD

Learn More About the Husky 1050e Electric Operated Diaphragm Pumps

Posted on by Sara Springer

Graco 1050e Electric Driven Diaphragm PumpsHusky 1050e EOD pumps offer some advantages over normal AOD pumps. Find out when you should use an EOD pump instead of an AOD and what sets the 1050e series apart from other EOD pumps in this presentation or the PDF.

1050e Features:

  • Low Pulsation Mode
  • Accurate, Repeatable Batch Dispensing
  • No shop air needed
  • Able to run against closed discharge (deadhead)

Watch Videos on Theory of Operation and More for Graco EODD Pumps HERE

View/Download the 1050e Process Tech Tips Presentation Notes HERE:

Discover How to use the Graco Motor Control Unit in this Videos HERE:

Tag Archive: AODD

Pumper Parts to be Discontinued

Posted on by Sara Springer

Nomad Parts for ARO, Wilden and Yamada PumpsSpringer Parts LogoWith the coming of 2017 Warren Rupp is discontinuing their Pumper Parts line of OEM quality AODD replacement parts. Many of these parts will still be available at the same pricing through Springer Parts. Our site will have all of the available parts listed and our customer service team is ready to help you find the right parts.

Springer Parts provides parts for ARO®, Wilden® and Yamada® AODD Pumps as well as parts for many other pump types and other liquid handling equipment- all below OEM prices for the same quality product!

Find Replacement Parts through Springer Parts HERE

^