Skip to Content

Tag Archive: Sandpiper

Sandpiper’s Warning of Pirate Parts for Your AODD Pump

Posted on by Sara Springer

Keep your SandPiper® pumps operating at peak performance with genuine SandPiper® parts!

Physical Appearance: Pirate parts often look the same but rarely perform the same as Sandpiper’s OEM parts for obvious reasons:

  • Sandpiper’s parts are made with longevity in mind, reducing downtime
  • Sandpiper’s parts are tested, and tested again for guarantied high performance
  • Sandpiper is constantly improving and changing designs to better perform directly with their equipment

Saving Money: Pirate parts look like a bargain but will cost you in the long run.

  • You WILL experience shorter life cycles with pirate parts due to cheaper materials and manufacturing practices
  • longer lengths of downtime
  • more frequent maintenance to equipment
  • Added potential to damaging other parts or your AODD pump

Your Sandpiper Warranty:

  • Pirate parts will most likely void your warranty with Sandpiper®
  • Pirate parts could potentially void industry certifications
  • Pirate parts can cause malfunction of your Sandpiper equipment and personal injury

Make smart choices when choosing your replacement parts for your Sandpiper AODD Pump and buy OEM instead of pirated parts to ensure you have a well maintained AODD pump that will operate as it should. For more information on Sandpiper’s OEM parts.

Think Pumps. Think Parts. Think Springer.

Springer Pumps sells only genuine SandPiper®, Blagdon®, Versamatic® and Marathon® pumps and parts.

Tag Archive: Sandpiper

The Most Convenient AODD Pump That Packs a Punch: Sandpiper’s EVOLUTION X® Pump Series

Posted on by Sara Springer

Sandpiper continues to improve it’s equipment with stunning results seen in the AODD EVOLUTION 1” Metallic Pumps Series. The innovations are impressive and ready to make a difference in your operating system today. 

One of the most challenging aspects of AODD pumps was equipment maintenance until Sandpiper improved their pumps. Now, the EVOLUTION ® Pump series makes daily care and repair simple, efficient, and fast. 

Convenient details of the EVOLUTION Pump Series by Sandpiper®: 

Reduced service time: Evolution X takes, on average, five minutes to service the air distribution system compared to 45 minutes on average for other AODD pumps.  

Serviceability: All the wet side nuts and bolts are the same size & length, and the use of washers has been eliminated. In fact, the EvolutionX has 50% fewer fasteners than the previous model. 

Accessibility: You can access 95% of airside components by removing only four bolts revealing an easily removable cartridge style main air valve and pilot valve assembly. 

Improved stability for increased safety: We have added “stand-off feet” to the inner chambers to stabilize the pump on the workbench during disassembly 

The AODD EVOLUTION Pump Series is also highly effective thanks to improved safety and efficiency levels through reduction in energy use and a 20% average increase in air efficiency throughout the entire curve over our prior model. The EvolutionX also boasts the highest flow rate of any other 1” AODD pump. 

There are 3 port choices available for the EVOLUTION ® pump series including the standard Universal ANSI/DIN Flanged Center Ported pumps, and options for a Universal ANSI/DIN Flanged Dual Ported or a Universal ANSI/DIN Flanged End Ported pump. 

For more information on Sandpiper’s EVOLUTION X Pump Series contact Springer Pumps. 

Think Pumps. Think Springer 

Evolution X 0523 SPEC SHEET

Evolution X 052623 SPEC SHEET

Tag Archive: Sandpiper

Complete Air & Air Wear Kits from Sandpiper®!

Posted on by Sara Springer

Complete Air & Air Wear Kits from Sandpiper®!

Is it time to freshen up the worn-out parts on your Sandpiper® pump? SPRINGER PUMPS ® can keep
your Sandpiper pump running smoothly with a replacement Air Kit or an Air Wear Kit.

What kind of kit do you need for your Sandpiper® Pump? Here is the difference:

Complete Air Kits include everything you need to do, a complete replacement of the main air valve and pilot valve assemblies as well as the elastomeric wear items (gaskets, seals, O-rings, bushings) included in the Air Wear Kits.

Air Wear Kits include just the elastomeric wear items (gaskets, seals-rings, bushings) to service the air side of the pump. They do not include a new main air valve or pilot valve assemblies found in the Complete Air Kits.

Sandpiper ® provides Complete Air & Air Wear Kits for 35 pump models, in stock and ready to ship. Protect your Sandpiper Pump’s performance, longevity and safety with one of their coordinating kits today. For more information or to request a quote contact SPRINGER PUMPS ® today.


Tag Archive: Sandpiper

NEW! Sandpiper’s Full Flow High Pressure Pumps

Posted on by Sara Springer

Extreme pumping applications require next-level equipment to keep systems operating.  Introducing Sandpiper’s Full Flow, High-Pressure Pumps!  Designed to pump high viscosity liquids over extended distances, this is the beast pump line you’ve been looking for.

Do you want to know more about Sandpiper’s Full Flow High-Pressure Pumps?  Here are the details:

  • Pumps provide pressure up to 232 PSI (16 Bar)
  • Applies to most industries, including filter press feeds, mine dewatering, slurry transfer, and high–pressure discharge applications
  • Superior reliability
  • Innovative air-valve systems
    • Eliminate stalling
    • Icing
    • Air leakage
    • Extends life of the pump
    • No lubrication needed
  • Available in 1” and 2” port sizes
  • 5-year limited product warranty

Get your system up to peak performance levels with a pump that can take on the challenges of most extreme processing conditions out there. Please contact Springer Pumps® for a Sandpiper® quote today.

Tag Archive: Sandpiper

Sandpiper Masters CBD OIL Production with Air-Operated Double Diaphragm Pumps

Posted on by Sara Springer

The legalization of CBD products has rescued the world from the addictive grip of opioids, and the production of hemp is historically at an all-time high. This fast-growing industry needs a durable and efficient method to create these goods.  Without fail, Springer Pumps has a proven solution to offer its clients: the Air-Operated Double Diaphragm Pump by Sandpiper.

Sandpiper directly answers the individual needs of the CBD Oil extraction industry by providing options for processing hemp, including hydrocarbon, ethanol, and supercritical CO2 methods.  By choosing a Sandpiper, AODD pump users will gain a competitive edge by installing this superior equipment.

Some impressive note-worthy features of Sandpiper AODD Pumps:

  • No electricity is required and can be fully grounded (ATEX compliant)
  • Pumps Fluids as cold as -40 Degrees Fahrenheit
  • Self-priming! Ideal for suction lift applications
  • Dry-run without damaging pumps or systems
  • Deadheads safely-no more damage to product or equipment

All these solutions apply to the challenges of the CBD Oil Industry. Sandpiper’s AODD Pumps have been used in a wide variety of heavy-duty applications to industry since 1965.  This company has built their equipment to navigate extreme manufacturing challenges including combustible liquids, viscous materials, and low-temperature processes, and more. When you buy an AODD Pump by Sandpiper, you know you’re getting a durable product backed by decades of proven field experience.   Suppose your company is looking to gain a competitive edge by improving production, reducing product loss, and saving itself time and aggravation. In that case, an AODD pump by Sandpiper is the product line for you.

Springer Pumps looks forward to speaking with you about a Sandpiper AODD pump

Tag Archive: Sandpiper

Sandpiper Evolution 2″ & 3″ vs Wilden PS800 & PS1500

Posted on by Sara Springer

How do the Sandpiper 2″ and 3″ Evolution AODD pumps perform when put up against the competition? They are more efficient, have a higher flow rate, cost less to operate and are easier to maintain. Sandpiper’s new Evolution series will save money over every other AODD pump on the market.

When it needs to be an AODD, it needs to be a Sandpiper Evolution!

Revolution S30 vs PS800

Tag Archive: Sandpiper

Sandpiper Evolution Standard Duty Pumps with Optimized Performance

Posted on by Sara Springer

Sandpiper EvolutionSandpiper has long been a leader in the AODD market, and now they have announced the EVOLUTION Line of Standard Duty Air Operated Double Diaphragm Pumps. Using the application of advanced engineering methods, Sandpiper Evolution has improved upon the trusted and proven product designs of their Standard Duty pumps. Standard Duty does not mean under performing. Sandpiper’s Standard Duty line outperforms the competition while requiring less maintenance time than the competition and being fully interchangeable with previous models.

EVOLUTION Beats the Competition:

  • Up to 32% Higher Max Flow Rate
  • Up to 67% Less Air Consumption
  • Up to 2.5 Time Better Air Economy
  • 5 Minute Pilot Valve Repair / Replace vs 55+ Minutes for Most Competitors

Tag Archive: Sandpiper

Containment Duty Pumps: How They Work

Posted on by Sara Springer
AODD Diaphragm Failure

Prevent a situation like this with a Sandpiper Containment Duty Pump

When a diaphragm fails on a typical AODD pump, the fluid can leak into the air side of the pump and out of the exhaust muffler. When pumping water for example, it may only be an inconvenience, but still the cleanup is a housekeeping chore. When pumping abrasive, corrosive or aggressive fluid this will damage the air valve components, and is a potential hazard to personnel by spraying through the muffler and pooling around the pump.

Tag Archive: Sandpiper

Sandpiper Signature Series AODD Pumps ~ Our Signature Ensures Your Success

Posted on by Sara Springer

Signature Series LOGOWarren Rupp’s Sandpiper Signature Series AODD Pumps include the Heavy Duty Flap (HDF), Heavy Duty Ball (HDB), and Containment Duty (CD) Pumps. These pumps occupy a unique niche in the Aid Operated Double Diaphragm Pump market. They are able to handle large solids and stand up to the abuses seen in harsh environments like mining and construction industries. The addition of the new Non-Metallic Heavy Duty Flap Valve Pumps makes this line even more versatile.



  • Flap Valves Handle Larger Solids than Ball Valves
  • Heavy Duty Construction for the Harshest Conditions
  • Lightweight, Non-Metallic Flap Valve Models for Portability
  • Containment Duty Pumps Offer Increased Safety and Protect Against Product Loss
  • More…Sandpiper Signature Series

Tag Archive: Sandpiper

BLACOH Surge Shield Bridges the Gap Between Surge Dampeners and Vessels

Posted on by Sara Springer

Blacoh Surge ShieldBlacoh Surge Shield TankBLACOH’s new Surge Shield line ranges from 25-500 gallons in size, fitting in between the smaller SENTRY Pulsation/Surge Dampeners and their SURGE CONTROL line. Surge Shield is available in 9 different sizes with multiple bladder materials. Reduce the wear and tear on your pumps and piping systems with BLACOH Surge/Pulsation control products.