Skip to Content
Exit

Last Chance to Order Sandpiper S1F Sandpiper Pumps!

Tag Archive: Non-Metallic Pump

Last Chance to Order Sandpiper S1F Sandpiper Pumps!

Posted on by Sara Springer

 

Final Call to all who are interested in ordering Sandpiper’s S1F Non-Metallic Pumps as they transition to their replacement line of Pumps, Evolution X Series. There is still time to order but don’t delay.

Sandpiper Pumps & Parts Affected/Discontinued S1F pumps include all models beginning with the following:

• S1FB3P (Polypropylene)
• S1FB3K (PVDF/Kynar)
• S1FB3C (Conductive Poly)
• S1FB3V (Conductive PVDF/Kynar)

Final orders for S1F non-metallic pumps must be placed by September 9th, 2024, and shipments must be scheduled before September 20th, 2024. S1F non-metallic service parts and kits will remain accessible for approximately 5 years.

Please click on the linkes for more information on the F1S Non-Metallic Pumps replacement line, the Evolution X Series:

EvolutionX052623 (1)

EvolutionX-0523 (1)

For additional details, to request a quote or order a S1F Non-Metallic Pump from Sandpiper, contact SPRINGER PUMPS® today.

Think Pumps. Think Springer.

Tag Archive: Non-Metallic Pump

POLYGUARD PFA Lined, Mag-Drive Gear Pumps from Liquiflo

Posted on by Sara Springer

Non-Metallic Wetted Parts with Metallic Gear Pump PerformanceLiquiflo Polyguard Pump

The Liquiflo POLYGUARD has NO metallic wetted parts, a mag-drive coupling with a PFA lined Containment Can and a stainless steel housing lined with PFA.  Poly-Guard combines the chemical resistance of a fluoropolymer with the strength of stainless steel. Max temperatures to 200° F & differential pressures up to 100 psi.
(more…)

Tag Archive: Non-Metallic Pump

GRACO ChemSafe Diaphragm Pumps

Posted on by Sara Springer

GRACO ChemSafe AODD Pump FamilyGRACO ChemSafe AODD pumps are designed specifically for chemical transfer applications. They feature 100% PTFE or UHMWPE fluid paths with zero exposed metal surfaces. Tie bolt design ensures leak free operation. ChemSafe AODD pumps are available in a range of sizes (1/4″ to 1 1/2″) to accommodate most application requirements.

(more…)

Tag Archive: Non-Metallic Pump

Bredel Heavy Duty Hose Pumps: Sealless & Valveless with Intrinsic Spill Containment

Posted on by Sara Springer

Bredel Hose Pumps: No Seals, No Valves & Only One Wetted PartBredel 50 Heavy Duty Hose Pump

Bredel, a Watson Marlow brand, makes Heavy Duty hose pumps that operate with pressures to 232 psi and flow rates to 350 gpm. Simple to own and operate, Bredel HD Hose Pumps handle abrasive slurries, corrosive acids and gaseous liquids as easily as water with no vapor locking and they can run dry indefinitely without damage. Bredel pumps save time and money by successfully handling the toughest applications, in a broad range of industries with less maintenance and downtime then the competition.
(more…)

Tag Archive: Non-Metallic Pump

Introducing the Genesys 2x3x6 Non-Metallic, End-Suction Centrifugal Pump

Posted on by Sara Springer

B73lean Designed GENESYS Pumps Outperform B73.1 StandardsMDM Genesys B73lean Pump

The GENESYS® non-metallic, end-suction centrifugal pump line is designed and engineered for highly efficient pumping solutions. The GENESYS® composite construction with no wetted metal parts gives it compatibility with many aggressive chemistries.
(more…)

Tag Archive: Non-Metallic Pump

New No-Valve, Qdos Metering Pumps From Watson Marlow

Posted on by Sara Springer

Simple, Easy to Use Metering Pump with Low MaintenanceQdos Requires No Ancillary Equipment

Qdos metering pumps offer accurate, linear & repeatable flow under varying process conditions (even fluctuating pressure levels to 7bar). Additionally there are no valves, making the Qdos easier to use than most diaphragm metering pumps. Maintaining the pump is simple with the ReNu pumphead, pull the old one out and put the new one in and your done. Calibration is also simple and quick with a digital readout to remove all quesswork from the process.
(more…)

Tag Archive: Non-Metallic Pump

Liquiflo’s POLY-GUARD Pump: Metallic Pump Performance – Sealless, Plastic Pump Cababilities

Posted on by Sara Springer

Sealless, Non-Metallic Wetted Parts with Metallic Gear Pump PerformanceLiquiflo Poly Guard Pump

The Liquiflo POLYGUARD has NO metallic wetted parts, a mag-drive coupling with a PFA lined Containment Can and a stainless steel housing lined with PFA.  Poly-Guard combines the chemical resistance of a fluoropolymer with the strength of stainless steel. Max temperatures to 200° F & differential pressures up to 100 psi.

Typical Applications: inorganic acids, difficult to handle bases or salts, Hydrochloric Acid, Ferric Chloride, Sulfuric Acid, Hydrofluoric Acid, Sodium Hypochlorite, Nitric Acid, Sodium Hydroxide and Chromic.

POLY-GUARD Features & Benefits:

  • Internal/external protection against corrosive fluids & harsh environments
  • Strong stainless steel body:
    • Handles pipe stresses & other harsh industrial conditions
  • Fluoropolymer lined for protection against corrosive liquids
    • Exempt from wicking problems associated with fiber-reinforced housings
    • Retains the pressure integrity expected of all metal pumps
  • Internal components: PEEK, Kynar (PVDF), Teflon, Silicon Carbide and TTZ
  • Pulseless flow for metering & transfer applications
  • Temperatures to 200° f
  • Differential pressures up to 100 psi
  • Available removable port fittings including flanges & sanitary ports
  • Self-sintered SiC shafts with exceptional chemical resistance & wear resistance
  • Alloy-C or carbon fiber Containment Cans lined with PFA:
    • “Alloy-C Can” limits eddy current development & subsequent heat generation
    • “Carbon Fiber Can” eliminates eddy currents altogether!

^