Skip to Content
Exit

Tag Archive: FLUX

VISCOPOWER! F570/F580 Series Progressive Cavity Pumps by FLUX

Posted on by Sara Springer

If you are looking for a pump that can run continuously while being gentle on your liquids, the VISCOPOWER® F570/F580 Series Progressive Cavity Pumps are perfect for your industrial application. 

Regardless of consistency, VISCOPOWER® pumps can pump low viscosity to high viscosity media at up to 100 ,000 cPs. Depending on the medium and application, these pumps can achieve flow rates of up to 13.7 GPM (52 l/min) and discharge pressures up to 217 PSIG (15 bar). Thanks to these qualities and low pulsation, these VISCOPOWER® Pumps are ideal for virtually all media including those sensitive to shearing and those containing solids. 

FLUX® products are developed and certified for use around the globe. They meet the most stringent of requirements and safety standards. Ideal applications include food, pharmaceutical, hygienic and hazardous industries.  

Features of the VISCOPOWER® F570/F580 Progressive Cavity Pumps: 

  • High pumping pressure up to 217 PSIG (15 bar) 
  • High pump capacity of up to 13.7 GPM (52 l/min) 
  •  Gentle, low shear pumping action 
  • Very quick and easy to clean. 
  • Minimal dead space makes the pump ideal for food and pharmaceutical use. 
  • Can be used vertically and horizontally. 
  • Can pump soft solids without damaging them. 

For more information or to receive a quote, contact SPRINGER PUMPS ® today. 

Think Pumps. Think Springer 

FLUX VISCOPOWER Brochure

REQUEST MORE INFORMATION

Tag Archive: FLUX

The FLUX RFM/RFML Diaphragm Pump: Versatile for Almost Any Application

Posted on by Sara Springer

The versatility of FLUX’s air-operated diaphragm pump lends itself to almost any application, making it ideal for multiple industries. If you make it, FLUX® can process it through its pumps. 

How high or low is the viscosity of your material? Either way, the RFM or RFML Flux pump can handle it. Are you afraid of running your pump dry? That’s alright, the RFM/RFML FLUX pump self-primes and protects itself from dry running. Are you worried about your material being too abrasive? Not with these pumps. They shine in the face of caustic materials, with options available to handle solid particles, harsh chemicals, highly flammable media, or liquids containing high gas content. With 4 sizes to choose from (3/8”, ½”, 1”, 1 1/2”, borehole/intake?), FLUX® Pumps has your application covered. 

Some additional features of this versatile RFM/RFML Pump by FLUX®: 

  • Massive construction 
  • Almost completely diffusion resistant due to the thick-surface structure 
  • Long service life even at high pressures due to the composite enduring diaphragm 
  • versions available with flap valves 
  • Extremely long service life even with abrasive media 
  • Quiet/low noise 
  • Composite enduring diaphragm with an integrated metallic core 
  • Easily accessible control valve without seals 
  • Safe dry-running and overload-proof 
  • Self-priming 
  • Insensitive to solids in suspension 
  • Variable delivery rates by simply adjusting the air pressure 
  • Very high chemical resistance 
  • Suitable for high temperature 
  • Long service life of diaphragm due to short stroke lifts 
  • Versions for use in hazardous areas are available 
  • FDA-certified version available 
  •  

FLUX packed these pumps with everything your manufacturing process needs including all threaded process connections, polypropylene or PTFE availability and options for conductive or non-conductive features; making it a wise investment for your business. 

To receive a FLUX® Pump quote or more information about FLUX® products, please contact SPRINGER PUMPS®. 

Think Pumps. Think Springer

Tag Archive: FLUX

RUN IT DRY! FLUX’s NEW Renner RM-TS Pump 

Posted on by Sara Springer

RUN IT DRY! FLUX’s Renner RM-TS Pump  

 Have you ever dealt with the aftermath of running a pump dry? Make sure this never happens to your business again and install FLUX®’s magnetically coupled centrifugal Renner RM-TS Pump into your process. 

With years of experience in handling hazardous materials, FLUX® continues its standard feature of metal-free pump head components for areas that encounter aggressive fluids. 

Additional features of the Renner RM-TS Pump: 

  • No slide bearing 
  • No magnetically axial-thrust equalizer required 
  • No pin-point contact system 
  • Extremely high resistance to chemicals 
  • Upon request, the new system can always be retrofitted to present pumps of the RM-type to make them safe to run dry 
  • Trouble-free operation of the pump even at high speeds 
  • Increase in efficiency through of an extremely small coefficient of friction 

It is also important to note that the bearings used in this pump produce a minimal amount of heat when the pump runs dry, and do not need to be cooled or lubricated. Patented pending 

Please reach out to SPRINGER PUMPS® for more information or to receive a quote for the Renner RM-TS Pump by FLUX®. 

Tag Archive: FLUX

The Robust CombiFLUX Battery Powered Drum Pump Transfer Solution

Posted on by Sara Springer

Flux Combiflux Battery Powered Pump MotorThe new FLUX CombiFLUX cordless option frees you from cords to reach drums in locations that usually require an extension cord and hassle. The battery powered motor is strong enough to handle up to ten 50 gallon drums on one charge and be recharged in 30 minutes. It easily attaches to CombiFLUX pump tubes of all makes and features the same performance as the 120v, corded model.
(more…)

Tag Archive: FLUX

FLUX MINIFLUX Bottom Discharge Tote Pump

Posted on by Sara Springer

MiniFLUX Bottom Discharge Container PumpThe MINIFLUX and MINIFLUX FDA are a horizontally installed container pump for emptying IBCs from their bottom outlets. Use this in place of a vertical pump when gravity feed isn’t enough and a vertical pump won’t fit. Works well for rapid dispensing, long-distance transfer, transfer to another container in a higher location, etc.

Features & Benefits of MiniFLUX Container Pump:

  • Transfer liquids by use of the bottom port on totes & IBCs
  • Residual quantities of less than 1% (depending on the angle of the container)
  • Eliminates lifting tote and splashing of harmful liquids
  • Eliminates the need for top entry, vertical pumps where overhead space is limited or otherwise unfeasible
  • Extended service life through proven seal design
  • Safe to transfer thin and flammable liquids
  • Can be used with commutator motors, brushless motors and air motors
  • Flows to 63 GPM, Heads to 43 feet
  • Viscosities to 1,000 cPs
  • XP rated – Suitable for hazardous applications that require grounding ATEX zone 1

Tag Archive: FLUX

FLUX F424 Sealless Drum and Container Pumps

Posted on by Sara Springer

FLUX F424 Sealless Drum and Container PumpsFLUX 424 Sealless Centrifugal Pumps with Pneumatic or Electric Motors. F 424 pumps can handle abrasive liquids that don’t leave deposits and come in a range of materials to handle most fluids from acids to bases. They are capable of running dry and are a good choice for a lightweight, general purpose pump. F242 pumps are primed when immersed in liquid and are self-draining when removed from liquid. They can be used in conjunction with most FLUX motors in both electric and pneumatic.
(more…)

Tag Archive: FLUX

FLUX Filling Units: The Inexpensive Alternative to Automated Filling Systems

Posted on by Sara Springer

FLUX Filling Units Allow Quick & Easy Dispensing of LiquidsFLUX Filling Unit

FLUX Filling Units allow manual and semi-automatic liquid dispensing. The Meter can be programed to turn the pump on with the first push of a button and off with the second or to dispense a precise, pre-specified amount of liquid with each push of the button.

FLUX Filling Unit Features:

  • Manual or Semi-Automatic dispensing nozzles available in polypropylene, PVDF or stainless steel
  • Works with most FLUX Pumps
  • (more…)

Tag Archive: FLUX

VISCOFLUX Mobile: A High Viscosity Drum Emptying System from FLUX Pumps

Posted on by Sara Springer

Stand Alone Mobile System For Easy Drum Emptying

CLICK HERE for a Labeled Detail View of VISCOFLUX MobileThe VISCOFLUX Mobile System consists of a motor, pump and follower plate mounted on a portable, stainless steel frame. The pump is raised and lowered with a battery powered, motorized elevator built into the frame. The system is operated simply by moving the unit over a barrel, lowering the pump until the follower plate makes contact with the fluid and then turning on the pump. VISCOFLUX products are designed to pump even the most viscous fluids like petroleum jelly, peanut butter and fruit purees.
(more…)

Tag Archive: FLUX

New FLUX Hand Nozzles in PP, PVDF & Stainless Steel

Posted on by Sara Springer

FLUX Hand Nozzles are Safe and Easy to Use

FLUX Hand NozzlesWith three new FLUX hand nozzles in PP, PVDF and stainless steel you can now deliver varying medias even faster and easier. They feature a new ergonomic lever and an optimized valve for positive shut off and improved safety.

(more…)

Tag Archive: FLUX

New FLUX Explosion Proof FP 430 Ex S Barrel Pumps

Posted on by Sara Springer

FLUX FP 430 Ex S Pumps Offer the Highest Level of Safety in Explosion Prone Areas

FLUX FP 430 Ex S Barrel PumpThe unique FLUX zone naturally ventilates the ball bearing in the upper area of the pump from Zone 0. Zone 0 is the most hazardous and explosion prone Zone.  This ventilation also allows for quicker detection of massive seal failure, and the pumped medium can escape outward.
(more…)

^