Skip to Content

Tag Archive: Centrifugal Pump

Centrifugal Pumps for Sanitary & Non-Sanitary Applications: The QC/QC+ Series Pumps by Q Pumps

Posted on by Sara Springer

There is nothing better than a piece of equipment that performs well, is interchangeable with other brands and is easy to maintain. That is what you get from the QC+ line by Q Pumps, a reliable, work horse that plays well with others in your facility. 

Ideal for the food, beverage and agrochemical industries, the QC+ Series pumps offer both sanitary and non-sanitary options. This line excels at pumping liquids like water, oils, juices, sauces, dairy, fertilizers, soda, most sulphatic mixes and over 100 additional applications. 

Additional features of the QC/QC+ Series by Q Pumps by Q Pumps: 

  • Easy to Assemble or Disassemble 
  • Easy Maintenance 
  • Excellent Lead Times 
  • Interchangeable with other brands 
  • High flow Pressures up to 130 psi 
  • Viscosity up to 600 cps 
  • Widest Range of sizes starting from QC-100- QC-6410 

 The QC/QC+ Centrifugal Pump Series by Q Pumps is a safe, reliable choice that is a breeze to work on, making it a solid choice for the next addition to your manufacturing system. For more information, please contact SPRINGER PUMPS ® today. 

Think Pumps. Think Springer. 

Tag Archive: Centrifugal Pump

24–72-Hour Shipping Centrifugal Q Pumps! Offer Ends May 31st, 2023

Posted on by Sara Springer

Our warehouse is fully stocked with Qc and QC+ Q Pumps, ready to ship to your business with a quick turnaround time. From now through May 31st, 2023, you will receive 24-hour shipping on standard pumps and NEMA seals, 72-hour shipping for all coupled engines and NEMA frames.  

Some restrictions will apply to this offer, contact SPRINGER PUMPS to place an order to request a quote before time runs out. 

Think Pumps. Think SPRINGER. 

Tag Archive: Centrifugal Pump

CURFLO ANSI Custom Skid Packages Now Available

Posted on by Sara Springer

Curflo Products G-Line Fully Built
Springer Pumps now offers custom ANSI Centrifugal Skid Packages from CURFLO pumps. Skid packages can be customized to fit existing systems or meet new system requirements. Control panels, custom motor requirements and pressure relief valves are just a few of the options available. Contact Springer Pumps today for more information.

The ANSI design was created in an effort to make replacement pumps easily accessible. All ANSI pumps are manufactured to be dimensionally interchangeable and have a back pull-out design. This allows facilities and plants the opportunity to source pumps from multiple manufacturers without changing their pipe schematic and design. The CURFLO G-Line Series is 100% interchangeable with the 3196. The G-Line Pump is available as a traditional pump or can be purchased as a skid package. CURFLO also provides spare parts purchases.

CURFLO Custom ANSI Skid PackageCurflo Custom Ansi Skid Package

Tag Archive: Centrifugal Pump

Positive Displacement Pump Problems?

Posted on by Sara Springer

New Type of Positive Displacement Pump Solves Common Issues

Qts Gif Loop Red Balls

Positive displacement pumps are used successfully in a wide range of applications in almost every industry. Many of these applications, however, suffer from a wide range of problems common to pumps like rotary lobe, rotary piston and progressive cavity pumps. Whether it be cavitation, rotor-to-body contact, wear due to tight clearances and abrasive fluids, loud operating noise or frequent repairs due to axial deflection, these issues cause no end of headaches to the plant maintenance personnel that deal with them.

Enter in the QTS Twin Screw pump. Twin screw pumps solve many of these problems. Due to the inherent qualities of the pump design they rarely produce cavitation (low NPSH requirements), there is no body/rotor or rotor/rotor contact (even at high pressures), abrasive fluids don’t cause nearly as much wear, they operate at very low noise levels and have absolutely zero axial deflection. QTS Twin Screw pumps are the future of positive displacement pumping.


Contact us by phone, through EMAIL or SUBMIT A RFQ through our site today to find out how Springer Pumps can improve your process performance and your bottom line with a QTS pump today!

Additional QTS Series Features:

  • LOW Pulsation Flow
  • Bi-Directional Flow, Self-Priming in Both Directions
    • Low NPSH Requirements, Reduces Possibility of Cavitation
  • Fully Drainable, CIP-able Design
    • Can be used for Process CIP Pump, Eliminating the Need for Second Pump and Equipment
  • Extremely Low Shear, Gentle Product Handling
  • High-Speed Operation, Up to 3000 RPM
  • And More…

Tag Archive: Centrifugal Pump

Introducing the Genesys 2x3x6 Non-Metallic, End-Suction Centrifugal Pump

Posted on by Sara Springer

B73lean Designed GENESYS Pumps Outperform B73.1 StandardsMDM Genesys B73lean Pump

The GENESYS® non-metallic, end-suction centrifugal pump line is designed and engineered for highly efficient pumping solutions. The GENESYS® composite construction with no wetted metal parts gives it compatibility with many aggressive chemistries.