Skip to Content
Exit

Tag Archive: Liquiflo

Aggressive Liquids Have Met Their Match! Magnetically-Coupled ANSI-Dimensional Pumps: ENDURA MC-Series by Liquiflo!

Posted on by Sara Springer

Rugged and durable, these magnetically-coupled ANSI-dimensional pumps by Liquiflo® are specifically designed to withstand aggressive chemicals and feature oversized shafts to reduce shaft deflections and extend bearing life.  

The Endura MC-Series® can also handle extreme pressure and heat, the standard Endura Pump can provide pressures up to 275 PSI/19bar and handle temperatures up to 350F /176C. 

Features: 

  • Flow rates up to 770GPM/2,900 LPM 
  • Heads up to 420ft/128m 
  • Corrosion-resistant 316 Stainless steel 
  • Magnetic Drive Design Eliminates Seal Leakage 
  • Lower cost than double-sealed pumps 
  • 7 ANSI-Dimensioned sizes 
  • Achieves or exceeds sealed pump performance 
  • The run-cool design extends the life of bearings and magnets 
  • Self-venting due to centerline discharge 
  • Easy maintenance 
  • Replacement modules are available 
  • Close-coupled or long-coupled with power frame option 

For more information about the ENDURA MC-Series® please contact Springer Pumps® today. 

Tag Archive: Liquiflo

POLYGUARD PFA Lined, Mag-Drive Gear Pumps from Liquiflo

Posted on by Sara Springer

Non-Metallic Wetted Parts with Metallic Gear Pump PerformanceLiquiflo Polyguard Pump

The Liquiflo POLYGUARD has NO metallic wetted parts, a mag-drive coupling with a PFA lined Containment Can and a stainless steel housing lined with PFA.  Poly-Guard combines the chemical resistance of a fluoropolymer with the strength of stainless steel. Max temperatures to 200° F & differential pressures up to 100 psi.
(more…)

Tag Archive: Liquiflo

The Plug & Play Pump and VFD Control from Liquiflo

Posted on by Sara Springer

Liquiflo VFD Motor AssemblyLiquiflo is proud to announce a 1 HP motor / variable frequency drive assembly option for the H-series pumps. The VFD/Motor assembly simplifies the motor and drive selection. When ordered with a close coupled H-series pump, the assembly comes installed onto the pump pedestal as shown, ready to take out of the box and plug into a 115 VAC wall outlet. The VFD allows the motor speed, thus the pump flow rate to be manually controlled via the keypad or potentiometer. The digital display can be easily configured to read frequency (Hz), RPM or 0-100%.
(more…)

Tag Archive: Liquiflo

New “Plug and Play” VFD Assembly from Liquiflo

Posted on by Sara Springer

Liquiflo Vdf Motor AssemblyLiquiflo is proud to announce a 1 HP motor / variable frequency drive assembly option for the H-series pumps. The VFD/Motor assembly simplifies the motor and drive selection. When ordered with a close coupled H-series pump, the assembly comes installed onto the pump pedestal as shown, ready to take out of the box and plug into a 115 VAC wall outlet. The VFD allows the motor speed, thus the pump flow rate to be manually controlled via the keypad or potentiometer. The digital display can be easily configured to read frequency (Hz), RPM or 0-100%.
(more…)

Tag Archive: Liquiflo

Come See Liquiflo Pumps at WEFTEC® 2016

Posted on by Sara Springer

Convention Center FrontLiquiflo WEFTEC 2016WEFTEC® 2016 will be held at New Orleans Morial Convention Center in New Orleans from Sept. 24-28, 2016.

(more…)

Tag Archive: Liquiflo

Liquiflo MAX Series Gear Pumps for Demanding Applications

Posted on by Sara Springer

MAX Series Gear Pumps Come in a Variety of Configurations for Difficult ApplicationsLiquiflo Max Series

Liquiflo designed the MAX Series with difficult situations in mind. These pumps can handle high pressures, corrosive environments and are forgiving of less than perfect operating conditions. Heavy duty construction means that slight misalignments in piping won’t distort the pump. They are available in single or double mechanical seal and mag-drive configurations.
(more…)

Tag Archive: Liquiflo

Liquiflo’s Pump Cartridge Saves Time and Money for 3 and H Series Pumps

Posted on by Sara Springer

Reduce Downtime with Pump Cartridges Today

Cartridge Replacement for 3 & H series Pumps

The Liquiflo Pump Cartridge restores mag-drive pumps to like new condition quickly and easily. Drastically reduce downtime by having a Pump Cartridge on hand.  Get 100% performance for only 75% of the original pump cost.  Simply slip out the old cartridge and insert the new one and you’re good to go!  The Pump Cartridge is available for 3 & H-Series Mag-drive Close-Coupled Gear Pumps.
(more…)

Tag Archive: Liquiflo

Liquiflo’s POLY-GUARD Pump: Metallic Pump Performance – Sealless, Plastic Pump Cababilities

Posted on by Sara Springer

Sealless, Non-Metallic Wetted Parts with Metallic Gear Pump PerformanceLiquiflo Poly Guard Pump

The Liquiflo POLYGUARD has NO metallic wetted parts, a mag-drive coupling with a PFA lined Containment Can and a stainless steel housing lined with PFA.  Poly-Guard combines the chemical resistance of a fluoropolymer with the strength of stainless steel. Max temperatures to 200° F & differential pressures up to 100 psi.

Typical Applications: inorganic acids, difficult to handle bases or salts, Hydrochloric Acid, Ferric Chloride, Sulfuric Acid, Hydrofluoric Acid, Sodium Hypochlorite, Nitric Acid, Sodium Hydroxide and Chromic.

POLY-GUARD Features & Benefits:

  • Internal/external protection against corrosive fluids & harsh environments
  • Strong stainless steel body:
    • Handles pipe stresses & other harsh industrial conditions
  • Fluoropolymer lined for protection against corrosive liquids
    • Exempt from wicking problems associated with fiber-reinforced housings
    • Retains the pressure integrity expected of all metal pumps
  • Internal components: PEEK, Kynar (PVDF), Teflon, Silicon Carbide and TTZ
  • Pulseless flow for metering & transfer applications
  • Temperatures to 200° f
  • Differential pressures up to 100 psi
  • Available removable port fittings including flanges & sanitary ports
  • Self-sintered SiC shafts with exceptional chemical resistance & wear resistance
  • Alloy-C or carbon fiber Containment Cans lined with PFA:
    • “Alloy-C Can” limits eddy current development & subsequent heat generation
    • “Carbon Fiber Can” eliminates eddy currents altogether!

^