Skip to Content
Exit

A Brew Master’s Best Friend: The QCB+ Series Pump by Q Pumps

Tag Archive: Springer Parts

A Brew Master’s Best Friend: The QCB+ Series Pump by Q Pumps

Posted on by Sara Springer

Brewing beer is a fine craft that requires specific equipment to get the job done right.  Q Pumps® appreciates a well-brewed beverage and has designed the QCB+ Series Pumps to ensure Brew Masters can rely on their equipment to process their beverages correctly.

What makes the QCB+ Series by Q Pumps® ideal for brewing?  Here are a few features to wet your whistle:

  • Manufactured under the NEMA or IEC norms.
  • Stainless steel 316L for the parts in contact with the product
  • Open Impeller with better support with a wedge and nut
  • Can work in 50 and 60 Hz
  • Stainless steel 304 adapter
  • Clamp connections: Bridas, Bevel Seat, and DIN
  • 100% sanitary internal balanced mechanical seal
  • Pressurized for minimum product build-up, keeps faces cool, and lubricates with fluid pumped through
  • Long term efficiency
  • Ability to pump Wort at near-boiling temperatures
  • The design avoids seal wear and solid build up if flashing occurs between seal faces
  • Interchangeable with any competitor C series pump
  • Conversion kits available

The QCB+ Series Pump by Q Pumps® is ready to change the way you process your beer, wine, and spirits. Please contact SPRINGER PUMPS® for a quote today.

 

Tag Archive: Springer Parts

OEM VACUUM PUMP PARTS AVAILABLE AT SPRINGER PARTS!

Posted on by Sara Springer

It is time to replace some parts on your vacuum pump. Where are you going to go to find those specific parts for your specific pump? SPRINGER PARTS®! We offer thousands of aftermarket items that meet or exceed the performance of OEM parts at prices you can afford.

SPRINGER PARTS® carries many replacement Vacuum Pump Parts including:

  • Cones
  • Rotor vanes
  • Inlets
  • Outlets
  • Seals

Take a moment and check out our extensive product line. We know SPRINGER PARTS® has the replacement parts to get your vacuum pump up and removing air and gas molecules from your process with little to no downtime.

Think Parts. Think Springer®.

 

Tag Archive: Springer Parts

NEW LEVEL OF CLEAN: Masosine Certa sets new standards for their Pumps with an EHEDG Type EL Class I – Aseptic certificate

Posted on by Sara Springer

The cleanest pump you’ll ever need!

EHEDG Type EL Class I and EHEDG Type EL Aseptic Class I Certification:

  •  The Type EL Aseptic Class I certification that Certa carries applies to closed equipment, wet cleaned-in-place (CIP) without dismantling, steam sterilizable and bacteria tight. All contact parts FDA and EC1935 compliant
  • Reduce your CIP cycle and the amount of cleaning agents required
  • Reduce chemical and water use and wastewater for disposal
  • Modular seal system options:
    • Single mechanical seal
    • Single mechanical seal with flush
    • Double mechanical seal

 Sine Pump® Advantage:

  • Gentle pumping with virtually no pulsation
    • Ultra low shear pumping of whole foods, meats, dairy and concentrates with no loss to product integrity.
  • Superior viscous handling
    • Powerful suction up to 12.33 Psi. Products with viscosities from 1 cP to 8 million cP can be transferred with ease.
  • Simplicity
    •  Minimal downtime. One shaft, one seal, and no timing gears enable easy in-place pump maintenance.
  • Interchangeable parts
    • Fully interchangeable components between pumps of the same size, reducing spares inventory.

Think Pumps. Think Springer.

Tag Archive: Springer Parts

RUN IT DRY! FLUX’s NEW Renner RM-TS Pump 

Posted on by Sara Springer

RUN IT DRY! FLUX’s Renner RM-TS Pump  

 Have you ever dealt with the aftermath of running a pump dry? Make sure this never happens to your business again and install FLUX®’s magnetically coupled centrifugal Renner RM-TS Pump into your process. 

With years of experience in handling hazardous materials, FLUX® continues its standard feature of metal-free pump head components for areas that encounter aggressive fluids. 

Additional features of the Renner RM-TS Pump: 

  • No slide bearing 
  • No magnetically axial-thrust equalizer required 
  • No pin-point contact system 
  • Extremely high resistance to chemicals 
  • Upon request, the new system can always be retrofitted to present pumps of the RM-type to make them safe to run dry 
  • Trouble-free operation of the pump even at high speeds 
  • Increase in efficiency through of an extremely small coefficient of friction 

It is also important to note that the bearings used in this pump produce a minimal amount of heat when the pump runs dry, and do not need to be cooled or lubricated. Patented pending 

Please reach out to SPRINGER PUMPS® for more information or to receive a quote for the Renner RM-TS Pump by FLUX®. 

Tag Archive: Springer Parts

SPRINGER PARTS Has Your Replacement Liquid Handling Replacement Parts!

Posted on by Sara Springer

Your job involves liquid, lots, and lots of liquid. Whether you are a professional power washer or head brewer, SPRINGER PARTS® has the replacement parts you need to keep your liquids flowing with little to no downtime. 

What replacement parts can SPRINGER PARTS® provide your business with? 

  • Seals 
  • O-rings 
  • Gaskets 
  • Pistons 
  • Rods 
  • Tips 
  • spray heads 
  • Hoses 
  • Nuts 
  • Bolts 

SPRINGER PARTS® also gives you the ease of finding parts through our search tool that allows you to enter a full or partial item number for quick, accurate results. Still cannot find that item? Reach us and a knowledgeable staff member will assist you. 

Tag Archive: Springer Parts

Springer Parts Has Your Replacement Mechanical Seals and Components!

Posted on by Sara Springer

Are you looking for a replacement mechanical seal or component? Springer Parts has the part you are looking for.  

We have hundreds of products that fit your name brand equipment, you can find our extensive list of brands here.  

Our OEM and aftermarket Seal Replacements, Seal Components, and Seal Upgrades are competitively priced, typically 20-40% less than OEM. Performance specifications and warranty meet or exceed OEM. 

Parts we carry: 

  • Seals 
  • Static faces 
  • Rotating faces 
  • Springs 
  • Elastomers 

Springer Parts also has a search tool for entering exact or partial product numbers for quick part ordering. Still stumped about the part you need? Contact Springer Parts here. 

Tag Archive: Springer Parts

SuperKlean is Super Stocked for 2022

Posted on by Sara Springer

The unpredictability of the U.S. supply chain has many companies feeling the pressure, and scrambling for supplies but not SuperKlean.  

With 30 years in business, the folks at SuperKlean have weathered many global challenges over the years and strategized long-term company needs when they decided to bulk up their inventory at the beginning of 2019. Fast forward to today’s market demands, the company proudly reports both their California and Ontario warehouses are fully stocked with 6 months of hot water washdown products ready for delivery. Orders continue to ship out without delays, most items are available for same-day shipping. 

SuperKlean has also announced its new pricing that will begin on January 1st, 2022. Orders are still being honored at current prices through the end of 2021. Place your SuperKlean order today and receive your products quickly from a company that is ready and waiting. 

Tag Archive: Springer Parts

Ace Sanitary Offers New Hose to Replace TRS Model

Posted on by Sara Springer

Ace Sanitary has announced a new, improved hose, the new TRP series as a replacement for their TRS series. 

  • TRP has a PTFE liner compared to the TRS FEP liner 
  • TRS will be available in longer production lengths. 
  • TRP series assemblies will be available in 2022. 
  • TRS series assemblies will be available until stock is depleted. 

To place an order for TRS assemblies or to learn more about the new TRP series, contact Springer Pumps today. 

Tag Archive: Springer Parts

Buy Your Replacement Pump Parts and Kits from SPRINGER PARTS!

Posted on by Sara Springer

Just like anything else that is used frequently, pumps need parts replaced and changed out. Where to get these essential items for your equipment? Just go to SpringerParts.com! 

Springer Parts has Repair, Rebuild and Service kits for popular Pumps, Mixer, and other process equipment. What specific types of kits do we offer our clients? Here is a quick list: 

Springer Parts offers quick ship times, often next day (not guaranteed). Our replacements are high quality, come with warranties comparable to OEM products and competitively priced 20-40%.  

Think Parts. Think Springer. 

 

Tag Archive: Springer Parts

A Pump for the Fishes-Thanks Hidrostal!

Posted on by Sara Springer

Water, our most valuable resource, has been globally pumped through our homes and our ecosystems for decades.  Now more than ever, society has prioritized the health of our planet, its water, and the creatures in it.  Recognizing this environmental need, Hidrostal has developed a solution to pump natural bodies of H2O while ensuring the survival of the life passing through their products.

A man ahead of his time, Martin Stahle patented his unique eco-friendly pump in 1960.  Today, Martin’s company Hidrostal® provides pumping stations designed to responsibly pump any aquatic life that passes through their pump chambers.  This eel and fish-friendly solution applies to river abstraction for water supply and irrigation, the cooling of power plants, extraction of water for large industrial complexes and drainage pump stations for flood plains, Hydro dams, etc.

Specifically, there are two pump lines featured in Hidrostal’s product lines that users should focus on when considering a fish-friendly pump.

The F-Type Pump line can process high volumes of fish flowing through a pump system, up to 30% fish-to-water ratio.  That’s a lot of fish!  These pumps are ideal for farming applications.

Are you pumping a large quantity of water? Then consider installing a V-Type Pump by Hidrostal®. Although these pumps can’t handle the volume of aquatic life that the F-Type offers, they can move serious amounts of liquid while preserving life inland drainage and flood prevention applications.

A third party tested and approved Hidrostal’s Eel and Fish Friendly pumps.  In the end, Hidrostal® was able to achieve a survival rate near 100% of all life that passed through its equipment.

^