SANDPIPER Heavy Duty Flap Valve Pumps Solve Common Sump Issues
Heavy Duty Flap Valve Pumps Use Gravity and Line Sized Fluid Paths to Prevent Clogs SANDPIPER Heavy Duty Flap Valve Pumps offer many advantages over other pumps typically used for sump applications. Standard AODD pumps use restrictive ball valves, and neither them nor “non-clog” centrifugal pumps can pass line sized solids. Most sump pumps pass […]
Tags: Commercial Sump Pumps, HD Flap Valve Pumps, Heavy Duty Flap Valve Pumps, Industrial Sump Pumps, SANDPIPER Warren Rupp, Sump Pump
Conversation Starters for Thanksgiving and Every Other Holiday
Thanksgiving conversation topics that won’t start WW3 can be hard to think of. Try some of these that don’t involve politics or religion.
FLUX Liquid Saver Drum Pumps: Empty Up to 99.98% from Drums
FLUX F425 Pumps Can Empty Drum and Other Containers of All but 0.05 Liters Most drum pumps have residual fluid in the tube that drains back into the drum when pumping is done. Not the Liquid Saver Pump from FLUX. Using a unique Flowback Stop Valve on the bottom of the pump tube, the F425 […]
Tags: Drum Pumps, FLUX Pumps, Liquid Saver Pumps, Lutz Pumps
Stop Using Hoists and Chains to Empty Drums and Barrels
Graco’s SaniForce Elevator Saves Time, Money, and Reduces Risk to Workers The Elevator is designed to have a Graco Piston Pump (2:1, 5:1 or 6:1) paired with it to empty drums quickly and efficiently without the hassle of hoists, cranes or chains. Leaving the barrels on the floor also reduces the chances of an accident […]
Tags: Graco Drum Elevator, Graco Drum Pumps, Graco Elevator, graco pumps, Graco SaniForce, SaniForce Elevator
PWR-FLO: A Low Cost, High Quality Pump Line from Nomad Pumps
The PWR-FLO is a full line of Air Operated Diaphragm Pumps. They are retrofittable to Wilden® AODD pumps at a much lower cost. They come in a full range of sizes from 1/4″ to 3″ sizes and a variety of wetted materials.
Tags: AODD Pumps, JDA Global, Nomad Pumps, PWR-FLO
BLACOH Hybrid Valve: Back Pressure Valve and Pulsation Dampener in One
Blow up valve backing valve In installations where a pulsation damper and back pressure valve are needed, such as metering or dosing, problems can arise. It can not be fully closed. The Hybrid Valve creates a smoother flow, which can be seen in the chart below. Reduces leakage points in a system. Find out more […]
Tags: Backpressure, Backpressure valve, BLACOH, Hybrid Valve, Metering Skid, Metering System, Pulsation Dampener
MasoSine SPS Pumps Used to Automate Granola Production at S Moores
S Moores, a popular “traditional” biscuits maker in England, changed from batch mixing granola to continuous mixing operations. A SPS200 pump, which was previously used for the batch mixing was redeployed for the continuous mixing operation along with two additional, new units. Using a revolution counter and speed controller (VFD), they are able to precisely measure the ingredients going into the granola mixer. This has allowed them to eliminate the need for a weighing assembly, and the majority of manual labor associated with this process.
Tags: Aseptic Process, Aseptic Pump, Aseptic System, Automated Process, Certa Pumps, Certa Sine Pumps, Circumferential Piston Pumps, Continuous Mixer, Continuous Mixing, EHEDG Type EL - Class 1, Lobe Pumps, MasoSine, MasoSine Certa, Sine Pump, Sinusoidal Pumps
Certa Now Certified for Aseptic Applications with More Sizes to Spec
Certa now has full EHEDG Aseptic certification allowing use within aseptic processes without the need for additional certification. Certa doesn’t require additional steam ports due to its bacteria tight design, proven by its EHEDG Aseptic certification.
Tags: 3-A Sanitary Standard, 3A Certified Pump, Aseptic High Viscosity Pump, Certa Pump, Certa Pumps, Certa Sine Pumps, EHEDG Type EL - Class 1, EHEDG Type EL Aseptic Class 1, High Viscosity Aseptic Pump, Low Sheer Pump, MasoSine Pumps, Zero Pulsation Pump
Graco Inc Pumps for Every Step of the Print Process
Graco has a pump to fit every step of the print process. From ingredient supply to finish ink delivery, from any supply source, Graco has a pump ideally suited to the task.
Tags: Graco Inc Pumps, ink pumps, Printing Pumps, Pumps for Ink Manufacturing, Pumps for Ink Process, Sealed Wet Cup
Peristaltic Pumps from Watson-Marlow Overcome Vapor Locking Problems
Watson-Marlow 500, 600 and 700 Series Cased Drive and Qdos Peristaltic Pumps are impervious to vapor locking, which means less maintenance time when pumping Sodium Hypochlorite. Learn more and find out why more water treatment operations are switching over to Watson-Marlow Peristaltic Pumps by visiting our site.
Tags: Chemical Dosing Pumps, Chemical Metering Pumps, Diaphragm Metering Pumps, Dosing Pumps, Easy to Calibrate Pumps, Metering Pumps, Peristaltic Pumps, Sodium Hypochlorite, Tube Pumps, Vapor Locking, Vapor Locking Problems
