Category: Gear Pumps

POLYGUARD PFA Lined, Mag-Drive Gear Pumps from Liquiflo

Posted on by R Andrew Springer

The Liquiflo POLYGUARD has NO metallic wetted parts, a mag-drive coupling with a PFA lined Containment Can and a stainless steel housing lined with PFA. Poly-Guard combines the chemical resistance of a fluoropolymer with the strength of stainless steel. Max temperatures to 200° F & differential pressures up to 100 psi.

The Plug & Play Pump and VFD Control from Liquiflo

Posted on by R Andrew Springer

This package is designed to simplify selection of motors and drives to provide an out of the box solution that can plug into a wall outlet and allows the end user to control the flow rate of the pump by adjusting the motor speed. The standard drive is designed to be user friendly, without the myriad of confusing parameters required by most VFDs.

Liquiflo Pumps are the Ideal Solution for MDI and TDI

Posted on by R Andrew Springer

Methylene diphenyl diiscocyanate (MDI) and toluene diisocyanate (TDI) react with ANY residual water instantly, forming polyurethane foams. Any -OH group can cause this reaction, but water is the most commonly found. Liquiflo has successfully pumped this chemicals without incident, and has a “DO NOT TEST WITH WATER” option for their pumps. Don’t lose a second because of bad reactions, use a Liquiflo pump!

New “Plug and Play” VFD Assembly from Liquiflo

Posted on by R Andrew Springer

This package is designed to simplify selection of motors and drives to provide an out of the box solution that can plug into a wall outlet and allows the end user to control the flow rate of the pump by adjusting the motor speed. The standard drive is designed to be user friendly, without the myriad of confusing parameters required by most VFDs.

ARO®, Wilden® & Yamada® AODD Parts & Kits

Posted on by R Andrew Springer

High quality aftermarket AODD and gear pump parts at significant savings compared to the OEM. With a large stock volume orders can be fulfilled and shipped quickly. AODD Parts and repair kits are available for ARO®, Yamada® and Wilden® Air for sizes 1/2″ to 3″, as well as Viking motor speed gear pumps from 1″ to 6″.

Liquiflo MAX Series Gear Pumps for Demanding Applications

Posted on by R Andrew Springer

Liquiflo designed the Max Series with difficult situations in mind. These pumps can handle high pressures, corrosive environments less than perfect installations. Heavy duty construction means that slight misalignments in piping won’t distort the pump. They are available in single or double mechanical seal and mag-drive configurations.

Rotan Magnetically Coupled Gear Pumps Features Uptime Cartridge

Posted on by R Andrew Springer

Rotan pumps can be found across many industries pumping asphalt, paint/laquer, molasses & even chocolate. Further the ROTAN magnetically coupled gear pump has a patented cooling system developed by DESMI. The magnetically coupled ROTAN protects the environment against pollution and are virtually 100% leakfree. The pump requires minimum maintenance compared to traditional designs which increases the reliability in operation.