Category: Abrasive Duty Pumps

A Solution for Papermaking with Bleach: Liquiflo’s Poly-Guard PFA Lined Pump

Posted on by Sara Springer

Reduce bleach’s corrosive impact on your papermaking equipment with Liquiflo’s Poly-Guard PFA Lined Pump.  Bleach, like many chemicals, requires specialized equipment to process it. While sodium hypochlorite is excellent at whitening and disinfecting, it also will react badly with many materials. This forces manufacturers to seek long-lasting, durable solutions that can handle steady flows of […]

Flux Pumps Rises to the Challenge of the Chemical Industry

Posted on by Sara Springer

One of the most challenging industries to provide product for is Chemical Applications.  Each material requires very specific safety standards and FLUX® Pumps has a solution for every kind. Strictly following these requirements, FLUX® Pumps continues to bring innovative products to the chemical industry while staying on the forefront of current safety protocols and regulations. […]

NEW! Sandpiper’s Full Flow High Pressure Pumps

Posted on by Sara Springer

Extreme pumping applications require next-level equipment to keep systems operating.  Introducing Sandpiper’s Full Flow, High-Pressure Pumps!  Designed to pump high viscosity liquids over extended distances, this is the beast pump line you’ve been looking for. Do you want to know more about Sandpiper’s Full Flow High-Pressure Pumps?  Here are the details: Pumps provide pressure up […]

Aggressive Liquids Have Met Their Match! Magnetically-Coupled ANSI-Dimensional Pumps: ENDURA MC-Series by Liquiflo!

Posted on by Sara Springer

Rugged and durable, these magnetically-coupled ANSI-dimensional pumps by Liquiflo® are specifically designed to withstand aggressive chemicals and feature oversized shafts to reduce shaft deflections and extend bearing life.   The Endura MC-Series® can also handle extreme pressure and heat, the standard Endura Pump can provide pressures up to 275 PSI/19bar and handle temperatures up to 350F /176C.  Features:  Flow rates up to 770GPM/2,900 LPM  […]

Clean Hazardous Locations with GRACO’s Pneumatic Pressure Washer

Posted on by Sara Springer

  If you work in hazardous locations, it can be a challenge to source equipment. Thanks to GRACO’S HydraClean LT 45:1 Pneumatic Pressure Washer, you can clean these areas in a safe, efficient manner.  The HydraClean LT 45:1 Pneumatic Pressure Washer is portable, making it easy to wash equipment in place and anywhere on your site. This includes underground locations, on land or sea. Do you have a volatile manufacturing environment? Then you need one […]

Hidrostal ‘Quick Ship’ Program

Posted on by Sara Springer

Hidrostal has many parts in stock and ready for “Quick Shipment” in 4-6 weeks. See a full list of parts available and their pump sizes. Hidrostal is the original screw centrifugal pump. Ideal for applications that require gentle solids handling, true non-clog performance, and durable construction. With these stocked parts and frames their lead times […]

SANDPIPER Heavy Duty Flap Valve Pumps Solve Common Sump Issues

Posted on by Sara Springer

Heavy Duty Flap Valve Pumps Use Gravity and Line Sized Fluid Paths to Prevent Clogs SANDPIPER Heavy Duty Flap Valve Pumps offer many advantages over other pumps typically used for sump applications. Standard AODD pumps use restrictive ball valves, and neither them nor “non-clog” centrifugal pumps can pass line sized solids. Most sump pumps pass […]

The Ideal Solution for Abrasives, Suspended and Line Size Solids

Posted on by Sara Springer

Sandpiper’s line of Heavy Duty Flap Valve Pumps are designed to handle too toughest situations. Flap valves allow for the handling of larger solids sizes, up to line size, as well as greater suction lift capabilities compared to ball valve models. With quick access to serviceable components and rugged construction these pumps provide reduced downtime when handling difficult to pump abrasive slurries and solids laden fluids.

Bredel Pumps are Ideal for Pumping Lime Slurries

Posted on by Sara Springer

Peristaltic hose pumps, like the Bredel and APEX model lines from Watson Marlow Fluid Technologies Group, eliminate these problems. The pumps are sealless and the slurry only comes into contact with the hose, which means caking isn’t a problem and the only wear part is the hose. Slurry settling is also eliminated due to the nature of peristaltic pumping.