Skip to Content
Exit

Engineered For Tough Jobs: Dewatering & Slurry K Series Pumps by Barmesa

Author Archives: Sara Springer

  1. Engineered For Tough Jobs: Dewatering & Slurry K Series Pumps by Barmesa

    Comments Off on Engineered For Tough Jobs: Dewatering & Slurry K Series Pumps by Barmesa

    Introducing a line of heavy-duty submersible centrifugal pumps ready to power through your messy application: the K Series Pumps by Barmesa®. Whether it’s dewatering, light slurry, or slurry, Barmesa has options that physically get to the bottom of your specific project.

    Below is a brief overview of Barmesa’s K Series Heavy-Duty Submersible Pumps:

    KTM Series (Versatile Submersible Dewatering Pumps): The KTM Series submersible dewatering pumps are built for muddy water removal and continuous duty. Featuring high chrome steel impellers and pump covers, they offer superior resistance to corrosion. Available in both single and three-phase models, these pumps perform reliably, even when not fully submerged. Applications include construction sites, portable utility, flood control, open mining, quarries, and dewatering.

    KAG Series (Reliable Submersible Light Slurry Pumps): The KAG Series is engineered for demanding, abrasive environments. Its high chrome steel impeller and pump cover offer exceptional wear resistance, while the built-in high nickel chrome agitator ensures efficient handling of muddy water with abrasive solids. Available in single and three-phase motor options. Applications include construction sites, light mud, effluent water, and sewage/wastewater.

    KMUD Series (Tough Submersible Slurry Pumps): Built for extreme slurry applications, the KMUD Series tackles tough, abrasive pumping challenges with ease. Its high-nickel chrome agitator and high chrome alloy impeller work in tandem to maintain smooth, efficient operation. Equipped with a robust three-phase induction motor, the KMUD Series delivers reliable power under demanding conditions. Applications include open mines, construction, treatment plants, drilling mud, pulp/paper process, and iron/steel.

    Get your hands on a pump that works as hard as you do when you bring a K Series Barmesa Pump onto your job site. For more information or to receive a quote, contact SPRINGER PARTS® today.

    THINK PUMPS. THINK PARTS. THINK SPRINGER.

    K SERIES BROCHURE

    REQUEST A QUOTE

  2. Simple. Efficient. Streamlined: The Compact Short Range System by Remote Control Technologies

    Comments Off on Simple. Efficient. Streamlined: The Compact Short Range System by Remote Control Technologies

    Never worry about your wireless communication between devices and machinery with Remote Control Technology’s Compact Short Range System that offers an ideal solution to short-distance communication- now more streamlined than ever. Applications include pump control, valve activation, pivot control, grain augers, light control, stackers, PLC Activation, engine control, and wireless automation.

    You can count on the Short Range System’s performance; operating at 900MHz, this system supports up to a quarter-mile range (non-line of sight) and includes two I/O, delivering dependable functionality without requiring a clear visual path.  It’s 25% less than the more powerful model that you don’t need for your smaller projects, and has a simple installation thanks to no external antennas. This sleek design also ensures a cleaner, more attractive appearance.

    Specs for the Compact Short Range System:

    • Power Input: 120-240VAC
    • Relays: 10A 240 VAC/ 30VDC
    • 50mA Draw (idle)
    • 1A Draw (transmit)
    • Range: 1/4 mile (approximate)
    • Minimum / Maximum Temperature Range:
    • -40°F to 185°F (-40°C to 85°C)
    • Security Encryption: AES

    It’s time to simplify your short distance communication with the Compact Short Range System by Remote Control Technologies. For more information or to receive a quote, contact Springer Pumps today.

    THINK PUMPS. THINK PARTS. THINK SPRINGER.

    Compact Short Range System OTO

    Compact Short Range System Brochure

    REQUEST A QUOTE

  3. Chop Solids with a Roto Blade of Fury: Barmesa’s CUT Series Submersible Pumps

    Comments Off on Chop Solids with a Roto Blade of Fury: Barmesa’s CUT Series Submersible Pumps

    Cut that chunky wastewater with the dependable durability of Barmesa’s CUT Series Submersible Pumps. Featuring Roto Blade technology, these reliable pumps will keep your system running smoothly and consistently.

    The Barmesa CUT Series submersible pumps are engineered for solids handling applications with a proprietary cutting system designed to slice through tough debris in wastewater, minimizing clogging and ensuring smooth operation. Each pump incorporates a tungsten carbide-tipped impeller and a high-chrome cutter plate for enhanced cutting efficiency and durability. Available in motor sizes from 3 to 10 HP, the CUT Series offers versatile solutions for industrial, wastewater, and sewage systems.

    Barmesa CUT Series Submersible Pump details and features:

    • Discharge: 4″ flange, horizontal with elbow vertical included.
    • HP: 3, 5, 7.5, 10
    • RPM: 1750
    • Impeller: cast iron ASTM A48, Class 30. Unique tungsten carbide tipped impeller and high chrome serrated cutter plate for slicing of solids.

    • Shaft: SUS410 series stainless steel
    • Motor: three-phase, 60 Hz. Air-filled, watertight, built-in overload, IP68 protection and, Class F insulation.
    • Seals: Double mechanical seal in oil chamber. Silicon carbide outboard, carbon ceramic inboard seal.
    • Liquid Temperature: 104 °F (40 °C) continuous

    The Barmesa CUT Series Pumps are drop-in replacements for many other brands and are ideal for immediate installation for municipal wet pit situations, retail, restaurants, sewer bypass, hospitals, pulp and paper mills, food processing, farming, housing developments, prisons, hotels and, other related applications.

    For more information or to receive a quote, contact SPRINGER PARTS® today.

    THINK PUMPS. THINK PARTS. THINK SPRINGER.

    BARMESA ROTO BLADE CUT BROCHURE

    BARMESA ROTO BLADE SPECS

    REQUEST MORE INFORMATION

  4. NEW From NOMAD: Plastic Conductive Pumps!

    Comments Off on NEW From NOMAD: Plastic Conductive Pumps!

    Known for being durable, reliable, and affordable, Nomad Pumps introduces a new line of Plastic Conductive Pumps to the market. These pumps are ideal for solvent applications and, ready to ship to your door.

    Details and features of Nomad’s Plastic Conductive Pumps:

    • 1″-1.5″/2″ PWR-FLO™ conductive poly
    • ATEX compliant
    • Great for solvent applications
    • Bolted Construction
    • Controlled Surface OHMS
    • Lightweight & mobile

    Get your hands on a well-made, affordable Plastic Conductive Pump for your next solvent application. For more information or to receive a quote, contact SPRINGER PARTS® today.

    THINK PUMPS. THINK PARTS. THINK SPRINGER.

    JDA Global New Product Offering

    REQUEST MORE INFORMATION

  5. “X” Out Traditional AODD Pump Problems with Evolution X by Sandpiper

    Comments Off on “X” Out Traditional AODD Pump Problems with Evolution X by Sandpiper

    Get the performance you need from an AODD Pump without the traditional challenges: meet EVOLUTION X®, Sandpiper’s revolutionary solution for industrial and manufacturing processes.

    Enjoy the enhanced convenience EVOLUTION X® Pumps bring to the table. These pumps boast the following features:

    • 50% fewer fasteners on the wet side, eliminating the need for washers and simplifying maintenance.
    • Stand-off-feet, designed for stability during servicing, preventing the pump from rolling or rocking.
    • Only 4 bolts required for air side maintenance, with easy-to-remove air cartridges for hassle-free servicing.

    In addition, your project will benefit from the installation of an EVOLUTION X® AODD Pump through:

    • Reduce maintenance time by nearly 90%, allowing you to service the pump in as little as 5 minutes.
    • Save time and money by minimizing downtime and increasing operational efficiency.
    • Enjoy the highest flow rate among 1” AODD pumps, coupled with a 20% improvement in air efficiency.

    Your system deserves to experience the game-changing impact of Evolution X. With a wide range of materials and porting options, this pump fits seamlessly into any application. For more information or to recieve a quote, contact SPRINGER PUMPS® today.

    THINK PUMPS. THINK PARTS. THINK SPRINGER.

    SandPiper Evolution X BROCHURE

    REQUEST MORE INFORMATION

  6. PRODUCT UPDATE: AMT’s 287 Series 3″ Self-Priming Pump

    Comments Off on PRODUCT UPDATE: AMT’s 287 Series 3″ Self-Priming Pump

    After your valued feedback, AMT is proud to announce the latest improvements to their 287 Series 3″ Self-Priming Pump.

    Updates to AMT’s 287 Series 3″ Self-Priming Pump:

    FRONT CLEAN-OUT COVER: Allows for easy removal of debris or drainage without disconnecting fittings.

    IMPROVED EFFICIENCY & PRIMING TIMES: Enhances that make your operation smoother and faster.

    MINOR CASING DESIGN CHANGE: Necessary to accommodate new features. All parts remain fully interchangeable with previous designs.

    AMT Self-Priming Cast Iron 287 Series Centrifugal Pumps are designed for a broad range of high-capacity applications, including liquid transfer, circulation, drainage and irrigation. The center-line discharge feature is specifically designed to prevent vapor binding and makes for convenient piping connections. Pumps are designed to handle liquids with solids content or dissolved solids and debris. All models are fitted with self-cleaning, semi-open stainless steel impeller, which can handle 3/8″ diameter semi-solids. Simple clean-out design permits easy removal of debris or drainage without disconnecting fittings. Built-in check valves for fast priming are standard on all units. Fill and drain plugs for easy installation and servicing.

    For more information on AMT’s 287 Pump Series contact SPRINGER PUMPS today.

    THINK PUMPS. THINK PARTS. THINK SPRINGER.

    3 inch Self-Priming Pumps BROCHURE

    REQUEST A QUOTE

  7. Speedy Transfer of Higher-Viscosity Substances with VISCOFLUX Lite Drum Emptying System

    Comments Off on Speedy Transfer of Higher-Viscosity Substances with VISCOFLUX Lite Drum Emptying System

    The VISCOFLUX lite© Drum unloading system can transfer vaseline from a 55-gallon drum in 5 1/2 minutes. Yes, you read that correctly (see video below). Whatever the high-viscosity substance you’re pumping, chances are you can pump it with this innovative technology by FLUX©.

    The drum emptying system VISCOFLUX lite is used to transfer higher-viscosity media which are just capable of
    flowing, out of ISO drums with lid and sea container drums. In the Ex version it is suitable for use in hazardous
    areas of zone 1 and for transferring a wide variety of flammable media (zone 0/1). The system transports the
    media gently and continuously. Like the VISCOFLUX and the VISCOFLUX mobile, the VISCOFLUX lite leaves just
    less than 1 % of the media in the drum.

    Features of the VISCOFLUX lite system:

    • Transfers higher-viscosity substances that are just
      capable of flowing
    • The flexible process seal makes sure almost no material
      remains on the drum wall
    • Residue in the drum less than 1 %
    • Mobile for easy transport to the drum
    • Eccentric worm-drive pump for gentle transport of the
      medium with little turbulence and pulsation
    • A combination of pump and motor can be individually adapted
      to the medium to be transported (modular system)
    • Follower plate for air-tight sealing of the medium
    • A version is available for use in Ex zone 0/1

    For more information on the VISCOFLUX lite drum emptying system please contact SPRINGER PUMPS today.

    THINK PUMPS. THINK PARTS. THINK SPRINGER.

    VISCOFLUX lite BROCHURE

    REQUEST A QUOTE

  8. Tried & True: Sandpiper’s Standard Duty Pumps

    Comments Off on Tried & True: Sandpiper’s Standard Duty Pumps

    Tried & True: Sandpiper’s line of standard-duty AODD pumps is anything but standard. These pumps are designed to get to work for you and deliver continuous operation for your next project. Sandpiper® provides time-tested value derived from their precision engineering, testing and stringent quality standards which have consistently elevated their brand’s reputation as the BEST AODD for over 60 years!

    An incredibly versatile pump, Sandpiper’s standard duty pump line is ideal for aerospace, automotive, construction, ceramics, chemical, coatings, electronics/semi-conductor, environmental, wastewater, sanitary and marine, transportation, mining, oil & gas, packaging, pulp and paper, and steel & metal applications.

    Sandpiper Standard Duty Pumps are available in the following variations:

    • Metallic ball valve
    • Non-Metallic ball valve
    • Non- Metallic poppet valve
    • Dewatering
    • Ore Processing

    For more information on Sandpiper’s Standard duty pumps or to receive a quote contact SPRINGER PUMPS® today.

    THINK PUMPS. THINK PARTS. THINK SPRINGER.

    NO STALL GUARANTEE

    DIAPHRAGM ROD GUARANTEE

    5-YEAR WARRANTY

     

     

  9. Versatile. Economic. Efficient: QIM Inline Mixers by Q-Pumps

    Comments Off on Versatile. Economic. Efficient: QIM Inline Mixers by Q-Pumps

    Introducing the transformer of Inline mixers: the QIM Inline Mixer by Q-Pumps. A perfect solution for users interested in homogenizing or disintegrating materials during processing; the QIM Inline Mixer can also be reconfigured with a multitude of accessories to achieve the desired result your system needs for success including powder mixing, flavor addition, emulsifying, solids disintegration, disolution, and homogenization.

    Features and benefits of the QIM Inline Mixer from Q-Pumps:

    • Different accessories for different solids
    • Meets 3-A and EHEDG standards
    • Designed for easy cleaning
    • Its versatility allows a QC+ pump to be converted into a QIM Inline Mixer
    • Accessible price
    • An addition kit easily converts a QC+ to be converted into a QIM Inline mixer of great efficiency
    • Seal faces in SiC/Sic as standard, other options available

    For more information on the QIM Inline Mixer by Q-Pumps contact SPRINGER PUMPS today.

    THINK PUMPS. THINK PARTS. THINK SPRINGER.

    QIM BROCHURE

    QIM Mixer Series Flyer

    REQUEST MORE INFORMATION

  10. FAST Dewatering with the Sludge Master Air-Driven, High-Flow Pump

    Comments Off on FAST Dewatering with the Sludge Master Air-Driven, High-Flow Pump

    Introducing the Sludge Master® Submersible Pump by Sandpiper®, made for fast dewatering of mud, leaves, sand and, solids. It provides high flow rates up to 300gpm and runs on compressed air for continuous power supply. This air-driven, high-flow pump gets the job done with timely execution, making the Sludge Master® ideal for construction, mining, utility, industrial, and Sewage applications.

    Features and Benefits of the Sludge Master® Pump:

    • Fully submersible
    • Weighs 59 lbs.
    • Won’t choke on small trash
    • Can run dry without damage
    • Handles solids up to 1 1/2″
    • Self-draining to prevent damage in subfreezing weather
    • Fits in openings as small as 14″ diameter
    • Self-priming and continuous automatic lubrication
    • Optional rock screen for 1/2″ solids available
    • Fool-proof design that handles abrasive substances with less wear
    • Built for rough handling and long life on land, sea, or offshore

    For more information on Sandpiper’s Sludge Master Dewatering Pump contact SPRINGER PUMPS today.

    THINK PUMPS. THINK PARTS. THINK SPRINGER.

    SLUDGE MASTER BROCHURE

    REQUEST MORE INFORMATION

^
CLOSED MON, 5/22 (MEMORIAL DAY). OPEN TUES, 5/23.
This is default text for notification bar
Learn more