New Stainless Steel Power Frames for New & Existing SPS Series Pumps

Posted on by Sara Springer

The Stainless Steel Power Frame adds 3A certification for CIP to the SPS pump line and, because of Watson Marlow’s efforts to reduce costs, it is available for same price as the original cast iron power frame. SPS pumps in existing applications can be easily retrofitted with the new power frame as well. To learn more about the SPS line of pumps from MasoSine download the Brochure below or send Springer Pumps an inquiry.

Tags: , , , , , , , , , , , , ,

New No-Valve, Qdos Metering Pumps From Watson Marlow

Posted on by Sara Springer

Qdos metering pumps offer accurate, linear & repeatable flow under varying process conditions (even fluctuating pressure levels to 7bar). Additionally there are no valves, making the Qdos easier to use than most diaphragm metering pumps.

Tags: , , , , , , , , , , ,

Ampco’s ZP1 “Frac” Pump with the New PTFE Double Lip Seal

Posted on by Sara Springer

With the PTFE Double Lip Seal, ZP1 “Frac” pumps are ideal for replacing the Waukesha U1 pumps used on Hydraulic Fracturing rigs. The ZP1 Series pumps come with stainless steel gear cases and pump housings as standard. Smaller sized pumps use 316L stainless steel shafts and larger pumps use 17-4PH shafts.

Tags: , , , , , , , , , , , , , , , , , , , , , , ,

Liquiflo MAX Series Gear Pumps for Demanding Applications

Posted on by Sara Springer

Liquiflo designed the Max Series with difficult situations in mind. These pumps can handle high pressures, corrosive environments less than perfect installations. Heavy duty construction means that slight misalignments in piping won’t distort the pump. They are available in single or double mechanical seal and mag-drive configurations.

Tags: , , , , ,

New EP Eccentric Hose Pumps From Graco

Posted on by Sara Springer

Graco EP Series Pumps utilize a single oversized roller to compress the hose. This causes less wear on the hose and provides more flow per revolution when compared to conventional hose pump designs. With no valves, seals or glands these pumps are ideal for abbrasive or caustic applications.

Tags: , , , , , , ,

Ampco Pump’s New AC+ Dry Blenders Offer Economical Powder Blending Options

Posted on by Sara Springer

The new AC+ Dry Blenders from Ampco Pumps uses the “tube within a tube” design to introduce powders into liquids. The powder is blended using an Ampco AC+ centrifugal pump. Rentals are available for trial and 6 week lead times ensure quick implementation.

Tags: , , , , ,

SuperKlean Steam/Cold Water Mixers, Spray Nozzles and More!

Posted on by Sara Springer

Hot & cold water mixing stations, steam & cold water mixing stations, nozzles and hoses are just a few products offered by SuperKlean. The 8000GM series steam & cold water mixing stations have two outlets and can work with as little as 30psi of water pressure. Download the brochure to see all of SuperKlean’s products.

Tags: , , , , , , , , , , , , , ,

Rotan MD Magnetic Driven Pumps for Molten Sulfur Service

Posted on by Sara Springer

The sealless design of Rotan MD Pumps eliminates the possibility of moisture contacting the sulfur. With the heating jacket and Rotan’s advanced, patented cooling system the sulfur is maintained at it’s optimal temperature while the magnet is constantly cooled.

Tags: , , , , , , , , ,

New FLUX Explosion Proof FP 430 Ex S Barrel Pumps

Posted on by Sara Springer

FLUX FP 430 Ex S Pumps Offer the Highest Level of Safety in Explosion Prone Areas. The unique FLUX zone naturally ventilates the ball bearing in the upper area of the pump from Zone 0, the most hazardous explosion prone Zone. This also allows for quicker detection of massive seal failure, and the pumped medium can escape outward.

Tags: , , , , , , , , , , ,