Gorman Rupp Offers Corrosion Resistant, Dry Run Capable, and Efficient Mag Drive Pumps.
Operation is similar to the standard centrifugal pumps, except the impeller is driven with a magnetic coupling, eliminating the need for a shaft seal. Magnetic drive pumps must be used where flooded suction exists. Typical OEM applications include film processors, laser and x-ray cooling systems, medical, scientific and laboratory equipment and silver recovery equipment.

Some of pigging’s advantages for the pharmaceutical processing industry include the following:
Product recovery higher than 99%
Quick product changeovers
A 50% reduction in water consumption
A 30% reduction in cleaning-chemical consumption

Dixon Pumps keeps your applications moving even at 30° F (1° C) with the M-1514/1522-N!

1 1/2″, 1.5 HP, 115/230 volt, 2 wheel portable dolly cart, non-explosion proof, 3:1 or 4:1 gear reducer with full flow bypass and nozzle.

As natural fisheries continue to decline in wild stock, land-based re-circulating aquaculture offers a sustainable solution to the world’s increasing appetite for sea food. MDM Inc. is proud to be a major part of that solution. A Las Vegas based shrimp producer utilizes Sequence® Pumps exclusively throughout their facilities.

The RM-MS Pumps Chemicals at High Pressures!
Eliminate the inefficiency of using multiple Single-stage centrifugal pumps. Instead, for high pressure applications, use the RM-MS multi-stage centrifugal pump. The RM-MS offers higher delivery rates and works in unfavorable operating areas.

DryStop Controller: Intelligent Control For Air Operated Double Diaphragm Pumps.
Warren Rupp, Inc’s DryStop device monitors the flow of air into a pump to detect loss of prime or “dry run” conditions. When a pump breaks prime and runs out of control, the DryStop unit identifies the situation and shuts the pump off to prevent pump wear and [...]

Sine Pumps for High Viscocity Applications & 20 Year Housing Warranty! MasoSine has been the leader in Sine technology for 30 years. The Sine pump was especially designed for the careful and gentle handling of particulate laden processed food and other fragile products within the dairy industries. Today thousands of Sine pumps are working successfully every day, handling viscous and shear sensitive products.

Real Plating Operation Application Testimony
A Colorado Springs-based plating operation, pursued every realistic cost reduction alternative possible before successfully choosing an Advance Pump.
A pump failure in the pH neutralizing system resulted in using less robust and cheaper sump pumps to expel treated effluent to the city treatment system.  A Cost/benefit analysis showed this company purchased a new low-price pump every other [...]

Graco is pleased to announce the introduction of the Agitator Speed Controller. 　This exciting new product was developed to improve the consistency of pneumatic agitators by maintaining a constant agitator speed as the material level inside the drum decreases. 　Agitators operating without the speed controller will increase their rotational speed and air consumption as the drum is emptied. 　This can lead to the reduction of finish quality due to the formation of air bubbles and excessive shearing. 　By improving the consistency of the agitator, the Agitator Speed Controller improves process control and reduces energy consumption.

Now available in a more compact, portable size truely anyone can operate the Biomist Mini. It is more affordable, compact and does not require electricity to operate. The Biomist Mini uses the same D2 Biomist Formula as the full sized unit. Simply screw the D2 bottle onto the applicator gun and start killing germs!